Mayer Rod

The film thickness is 120μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

The film thickness is 300μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

Formed, wet film thickness 50μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 9μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 52μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

The film thickness is 250μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

Formed, WFT 2μm, diameter 10mm, Total length 500mm, application width 500mm, no grip width, material 304 stainless steel

The film thickness is 200μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

Formed, wet film thickness 35μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 25μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 25μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 13μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

The film thickness is 230μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

The film thickness is 100μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

The film thickness is 330μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

The film thickness is 150μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

The film thickness is 180μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

Formed, wet film thickness 80μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

The film thickness is 80μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

The film thickness is 270μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

Formed, WFT 45μm, diameter 10mm, Total length 250mm, application width 250mm, grip width 0 + 0mm

Wet film thickness 300 μ m, application width of 250mm, wear-resistant stainless steel material, formed Spreader process, easy to clean continuous wire, wear-resistant and anti-corrosion.

The wet film thickness is 200μm, the Total length and application width are 250mm, and it is made of wear-resistant stainless steel.

The wet film thickness is 230 μ m, the application width is 250mm, the wear-resistant stainless steel material is used, and the formed Spreader process is easy to clean the continuous wire, which is wear-resistant and anti-corrosion.