Brand：
$1003.00
DONGRU DR200A concrete Coating thickness gauge Ultrasonic nondestructive Measurement Instrument
Measurement accuracy of 3% +/- 3μm with high frequency single crystal probe and automatic signal gain adjustment, range 40-1200μm, support delamination measurement and large capacity Data storage.
$410.00
SE
DUBAN DB22-CM221 Coating Thickness Gauge with F/NF probe Measurement range 0~2000μm
0~2000μm (Miscellaneous Measurement range can be customized)
Measuring method F magnetic Induction & NF eddy current, Measurement range 0~2000μm (Miscellaneous Measurement range can be customized), resolution 0.1μm /1 μm, Precision +/- 1~ 3% n or +/- 2.5μm, minimum surface F: convex 1.5mm/concave 25mm; N: convex 3mm/concave 50mm, minimum measurement area 6mm.
$579.00
SE
DUBAN DB22-CM222 Coating Thickness Gauge with F/NF probe Measurement range 0~2000μm
0~2000μm (Miscellaneous Measurement range can be customized)
Measuring method F magnetic Induction & NF eddy current, Measurement range 0~2000μm (Miscellaneous Measurement range can be customized), resolution 0.1μm /1 μm, Precision +/- 1~ 3% n or +/- 2.5μm, minimum curved surface F: convex 1.5mm/concave 25mm; N: convex 3mm/concave 50mm, minimum measurement area 6mm, thinnest substrate 0.3mm.
$1808.00
List Magnetik TOP-CHECK Dual platings Thickness Gauge
Fe：0-5000um，NFe：0-2000um
Structure machine (Fe/NFe), probe ruby probe, can be 90 degrees swirl/spin, measurement of inner tube and narrow space coating, probe area φ 8mm, minimum test curvature radius convex: 6mm, concave: 38mm, Measurement range Fe: 0-5000um, NFe: 0-2000um
$4018.00
KETT L-600 Standard film thickness gauge portable probe replaceable
Portable design for easy hand-held operation. The resolution can reach 0.1 μm, the data storage capacity can reach 50,000, it supports a variety of international measurement standards, and can adapt to the measurement needs of different matrix materials by changing the probe.
$230.00
SE
LANDTEK Thickness Gauge Probe 90 ° Right Angle Aluminum Based Probe
eddy current
Right angle 90 degree probe, suitable for narrow area thickness measurement; eddy Current principle.
$834.00
SE
Defelsko FTS split conventional probe 6000 μm thick coating Measurement range
Magnetic Induction0~6000μm±1%
$1393.00
SE
Qnix Fe/NFe3mm Dual Function Thickness Probe for magnetic Induction and eddy Current 3000μm
Magnetic Induction + eddy Current0~3000μm±2~3%
$769.00
SE
Defelsko FRS Thickness Gauge Probe
Magnetic Induction0~1500μm±1%
90 degree probe, magnetic Induction thickness measurement, range 0~1500μm, suitable for low clearance area measurement, completely waterproof for underwater measurement.
$2594.00
SE
Defelsko PRB200B Ultrasonic Thickness Gauge Probe PosiTector200B
ultrasound13~1000μm±3%
$1049.00
SE
Defelsko FXS Xtreme ™ Rough Probe, Wear Probe
Magnetic Induction0~1500μm±1%
The measurement surface of the FXS Xtreme ™ probe is zirconia toughened aluminum oxide abrasion surface, ideal for rough steel surface measurement. Compatible with PosiTector hosts with serial numbers greater than 700000 and the new Positector SmartLink.
$1356.00
SE
Defelsko FNDS composite coating probe, zinc/paint
Magnetic Induction + eddy Current0~1500μm±1%
$1279.00
SE
Qnix Fe/NFe 1.2mm Dual Function Thickness Probe for magnetic Induction and eddy Current 1250μm
Magnetic Induction + eddy Current0~1250μm±2~3%
$2875.00
SE
Defelsko PRB200C Ultrasonic Thickness Gauge Probe PosiTector200C
ultrasound50~3800μm±3%
$793.00
SE
Defelsko NS conventional strip line probe measurement non-ferrous metal substrate coatings
Eddy Current0~1500μm±1%
$3156.00
SE
Defelsko PRB200D Ultrasonic Thickness Gauge Probe PosiTector200D
ultrasound50~7600μm±3%
$373.00
SE
PosiPen thickness measuring pen type thermal spray-on lining Thickness Gauge
Magnetic Induction5~500μm±10%
Magnetic Induction principle, no battery required, suitable for thermal spray-on lining thickness measurement, thickness measurement range 5~ 500μm, meet the standard ASTM D7091/B499, ISO2808, etc., with calibrated certificate, probe contact temperature -100 ℃~ 230 ℃.
$561.00
SE
Defelsko F Integrated Probe 6000 F Adapted to PosiTector Host
Magnetic Induction0~1500μm±1%
$163.00
SE
LANDTEK Thickness Gauge probe 90 ° right angle iron based probe
magnetic induction
Measurement angle 90 °, using magnetic Induction Measurement principle, suitable for measurement edge coatings, narrow tube coatings or small surface area coatings, especially for some small workpiece thickness measurement.
$1049.00
SE
Defelsko N0S split 0 ° probe, thin coating
Magnetic Induction0~625μm±1%
0 ° probe, 0~625μm, built-in temperature compensation, suitable for measuring small parts samples, can measure thickness underwater.
If you don't know how to choose "Coating Thickness Gauge", please consult customer service.