Coating Thickness Gauge

Measurement range 0~5mm, error range +/- 5%, resolution 0.1μm | 1μm, widely used in the measurement of steel, iron and other ferromagnetic metal substrates on non-ferrous magnetic coatings, platings.

LANDTEK mid-range practical type, built-in probe, magnetic Induction principle; RS232 interface; automatic memory calibrating; hand-held part groove design; USB and Bluetooth data output can be purchased separately.

1250μm thickness measurement; Automatic memory calibrating, magnetic Induction; RS232C interface; optional USB and Bluetooth data output.

Integrated structure, 3000μm thickness measurement; Automatic memory calibrating, magnetic Induction; RS232C interface; Single and Continuous Measurement modes; Automatic memory calibrating; USB and Bluetooth data output can be purchased separately.

Split structure, 3000μm thickness measurement; Automatic memory calibrating, magnetic Induction; RS232C interface; Single and continuous Measurement mode; Automatic memory calibrating; USB and Bluetooth data output can be purchased separately.

Range 0~3000 microns; integrated built-in iron-based probe, the probe material is ruby; no need to calibrate.

Magnetic metal substrate thickness measurement, split structure, thickness measurement range 0~200μm, Precision +/- 1~ 3% n or +/- 2.5μm, with single and continuous thickness measurement mode, dedicated to coating measurement on small workpieces.

Thickness Gauge host, probe needs to be purchased separately. Support a variety of Calibration methods, can store 2000000 readings, the display screen can be turned over from multiple angles, and the shell contains fiberglass.

Magnetic induction, split probe, range 0-500um, error range ± (2% of reading + 0.3um); Minimum matrix Film thickness 0.1mm; Equipped with test fixture, the repeability can reach 0.1um; Small size/special-shaped material can be measured.

Measurement principle: magnetic Induction + eddy Current, Measurement range 0~1250μm, error range +/- 3%, resolution 1μm, is a built-in probe integrated structure of the dual-use Thickness Gauge, the probe can automatically identify the magnetic metal substrate and nonmagnetic metal substrate, accurate measurement of the thickness of the coating.

Magnetic Induction, measurement range 10~3000μm, error range +/- 2μm/2%, resolution 0.1μm, with free calibrated measurement, online statistics, backlight display and other functions.

Display accuracy 0.1μm, battery life to meet more than 40,000 measurements, statistical functions: average, MAX Maximum, MIN Minimum, standard deviation, measurement range 5mm.

0~5000μm, Measurement accuracy +/- 3% H + 1.5μm, can detect the nonmagnetic Coating thickness on all magnetic substrates, such as lacquers on steel and iron, fire-proof coatings, anti-corrosion coatings, powder coatings, plastics, porcelain, chromium, copper, zinc, etc.

Measurement accuracy of +/- 1~ 3% n or +/- 2.5 µm or 0.1 mil, iron-based and non-iron-based dual-use

Display accuracy 0.1μm, display 2 inch wide Viewing Angle omnidirectional IPS-TFT color LCD, power supply 2xAA alkaline battery, battery life meets 40,000 previous measurements, statistical function average, MAX Maximum, MIN Minimum, standard deviation, measurement speed ≥ 100/min, measurement accuracy (Fe mode ) +/- ( 1μm + 2% reading) @0-2mm or +/- 5% reading @> 2mm, measurement accuracy (NFe mode ) +/- ( 2μm + 2% reading) @0-2mm or +/- 5% reading Number @> 2mm.

Measurement range 0~12mm, Accuracy 1~ 3% n or 0.2mm, automatic material recognition, support single and continuous measurement, buzzer prompt in operation, can store data and provide statistical functions, support USB, RS-232 and Bluetooth data output.

High resolution and wide Measurement range, Single and Continuous Measurement modes, Male/Imperial unit conversion, USB and Bluetooth data output options.