Brand：
$344.00
SE
YIBAI CTG-600F10 Single iron Coating Thickness Gauge 10mm
magnetic Induction0~10mm±3%
Measurement range 0~10mm, Measurement accuracy +/- 3% H + 1.5μm, can detect the nonmagnetic Coating thickness on all magnetic substrates, such as paint on steel, iron, powder coatings, plastics, porcelain, fire-proof coatings, anti-corrosion layer, enamel, scales, 3PE, etc.
$610.00
SE
AMITTARI AC-112-200NF Coating Thickness Gauge Aluminum-based Film Thickness Gauge
High-precision and a wide range of applications, supports the measurement of a variety of coatings and substrate materials. Its advanced nondestructive detection technology, USB and Bluetooth data transfer capabilities.
$231.00
SE
YIBAI CTG-800F5 Single Iron Base Large Range Coating Thickness Gauge
magnetic Induction0~5000μm0-1500μm：±2%H+1μm；1500-5000μm：±3%H+1.5μm
Measurement accuracy +/- 2 %~ +/- 3%, LCD lattice LCD screen, magnetic Induction principle, spring guide sleeve probe with wear-resistant cemented carbide probe.
$832.00
SE
German Nix QNix 4500 + F3 integrated coating platings Thickness Gauge Fe iron-based probe 0-3000μm
3mm
Display accuracy 0.1μm, display 2 inches wide Viewing Angle omnidirectional IPS-TFT color LCD, power supply 2xAA alkaline battery, battery life meets 40,000 above the measurement, statistical function average, MAX Maximum, MIN Minimum, standard deviation, operating temperature 0 ℃~ + 50 ℃, storage temperature -20 ℃~ + 70 ℃, Relative Humidity 10%~ 90%, measurement range 3mm, measurement speed ≥ 100/min, measurement accuracy (Fe mode ) +/- ( 1μm + 2% reading) @0-2mm or +/- 5% reading @> 2mm.
$812.00
SE
Defelsko FTS split conventional probe 6000 μm thick coating Measurement range
Magnetic Induction0~6000μm±1%
$747.00
SE
Defelsko FRS Thickness Gauge Probe
Magnetic Induction0~1500μm±1%
90 degree probe, magnetic Induction thickness measurement, range 0~1500μm, suitable for low clearance area measurement, completely waterproof for underwater measurement.
$1017.00
SE
Defelsko FXS Xtreme ™ Rough Probe, Wear Probe
Magnetic Induction0~1500μm±1%
The measurement surface of the FXS Xtreme ™ probe is zirconia toughened aluminum oxide abrasion surface, ideal for rough steel surface measurement. Compatible with PosiTector hosts with serial numbers greater than 700000 and the new Positector SmartLink.
$366.00
SE
PosiPen thickness measuring pen type thermal spray-on lining Thickness Gauge
Magnetic Induction5~500μm±10%
Magnetic Induction principle, no battery required, suitable for thermal spray-on lining thickness measurement, thickness measurement range 5~ 500μm, meet the standard ASTM D7091/B499, ISO2808, etc., with calibrated certificate, probe contact temperature -100 ℃~ 230 ℃.
$548.00
SE
Defelsko F Integrated Probe 6000 F Adapted to PosiTector Host
Magnetic Induction0~1500μm±1%
$161.00
SE
LANDTEK Thickness Gauge probe 90 ° right angle iron based probe
magnetic induction
Measurement angle 90 °, using magnetic Induction Measurement principle, suitable for measurement edge coatings, narrow tube coatings or small surface area coatings, especially for some small workpiece thickness measurement.
$747.00
SE
Defelsko FRS right angle probe for measurement of low headroom areas.
Magnetic Induction0~1500μm±1%
$1017.00
SE
Defelsko F0S split 0 ° probe 1150 μm/+/- 1% for small parts, edge coating measurements
Magnetic Induction0~1150μm±1%
$1017.00
SE
Defelsko F90S split 90 ° right angle probe measurement low headroom area
Magnetic Induction0~1150μm±1%
$1890.00
SE
Defelsko FNGS Ultra Thick Probe 63.5mm Stainless Steel Cable
Magnetic Induction0~63.5mm±3%
$173.00
SE
KAIRDA F1 standard probe magnetic Induction NDT530 Coating Thickness Gauge optional probe
magnetic induction0 ~ 1250µm±3%
Measurement range 0~1250μm, error range +/- 3%, resolution 0.1mm, designed for measurement of magnetic nonmagnetic coatings on metal substrates.
Login
Libo F1 Probe for use with leeb220/222 Coating Thickness Gauge
magnetic induction0 ~ 1250µm
Login
LEEB probe (with printer) F1 magnetic Induction probe with leeb242 Coating Thickness Gauge
magnetic induction0 ~ 1250µm
Measurement principle: magnetic Induction, Measurement range 0~1250μm, adaptable model leeb242, equipped with a printer, can print out the measurement data.
$312.00
SE
KAIRDA F10 Large Range Probe NDT530 Coating Thickness Gauge optional probe
magnetic induction0 ~ 10000μm
$467.00
SE
KAIRDA F190 ° 90 ° Right Angle Probe Optional probe for NDT530 Coating Thickness Gauge
magnetic induction0 ~ 1250µm±3%
Measurement range 0~1250μm, error range +/- 3%, resolution 0.1mm, test environment magnetic metal matrix, overlay organic materials and other nonmagnetic overlay (such as: paint, lacquer, enamel, enamel, plastic and anode treatment, etc.).
$1555.00
SE
German EPK F2 high temperature magnetic probe, temperature up to 250 ℃ thickness range 10~2000um
Magnetic Induction0~2000μm
$1554.00
SE
German EPK F20 Thickness Gauge probe, thickness measurement range 0~20000um
Magnetic Induction0~20000μm
$1266.00
SE
German EPK F1.6 Film Thickness Gauge probe, thickness range 0~1600um
Magnetic Induction0~1600μm
$1266.00
SE
German EPK F3 Thickness Gauge probe, thickness measurement range 0~3000um
Magnetic Induction0~3000μm
If you don't know how to choose "Coating Thickness Gauge", please consult customer service.