Coating Thickness Gauge

Measurement accuracy of +/- 1~ 3% n or +/- 2.5 µm or 0.1 mil, iron-based and non-iron-based dual-use Coating Thickness Gauge, Single and Continuous Measurement modes available.

Magnetic Induction + eddy Current, Measurement range 0~1500μm, Measurement accuracy +/- 2% H + 1μm, spring guide sleeve probe with wear-resistant cemented carbide probe, can measure 1-5μm ultra-thin coatings.

Coating thickness on plastics, Glass, ceramics and metals can be measured, and the thickness of multi-layer coatings or coatings + substrates can be measured at the same time. Measurement range is 13~ 14800μm, and three Speed of sound settings.

0~1250 µm, Measurement accuracy +/- 1~ 3% n, Suitable for measurement of Coating thickness of ferrous and non-ferrous materials, Single and Continuous Measurement modes, Automatic recollection of calibrated values, metric-to-metric unit conversion, manual and automatic shutdown functions.

Magnetic Induction, Measurement range 0~1500μm, Measurement accuracy +/- 2% H + 1μm, wear-resistant cemented carbide probe spring guide sleeve probe, light touch Measurement accuracy is good.

Measurement accuracy of +/- 1~ 3% n or +/- 2.5 µm or 0.1 mil, iron-based and non-iron-based dual-use

Measurement range 0~12mm, Accuracy 1~ 3% n or 0.2mm, automatic material recognition, support single and continuous measurement, buzzer prompt in operation, can store data and provide statistical functions, support USB, RS-232 and Bluetooth data output.

High resolution and wide Measurement range, Single and Continuous Measurement modes, Male/Imperial unit conversion, USB and Bluetooth data output options.

Measurement accuracy +/- 2 %~ +/- 3%, LCD lattice LCD screen, magnetic Induction principle, spring guide sleeve probe with wear-resistant cemented carbide probe.

High-precision and a wide range of applications, supports the measurement of a variety of coatings and substrate materials. Its advanced nondestructive detection technology, USB and Bluetooth data transfer capabilities.

Standard test range: 0~1250µm/0~50mil (Miscellaneous Measurement range can be customized), resolution: 0.1 µm (below 100 µm); 1 µm (above 100 µm); 0.1mil, Measurement accuracy ： +/- 1~ 3% n or +/- 2.5 µm or 0.1mil, thinnest substrate: 0.3mm/12mil, minimum convex diameter: 26mm/1.02inch, minimum concave radius: 50mm/1.97inch.

Eddy Current + magnetic Induction, 0~3000μm, resolution 0.1μm, Measurement accuracy +/- 2% H + 1μm, LCD lattice LCD screen, spring guide sleeve probe with wear-resistant cemented carbide probe, light touch Measurement accuracy is good.

Measuring method F magnetic Induction & NF eddy current, Measurement range 0~2000μm (Miscellaneous Measurement range can be customized), resolution 0.1μm /1 μm, Precision +/- 1~ 3% n or +/- 2.5μm, minimum curved surface F: convex 1.5mm/concave 25mm; N: convex 3mm/concave 50mm, minimum measurement area 6mm, thinnest substrate 0.3mm.

Right angle 90 degree probe, suitable for narrow area thickness measurement; eddy Current principle.

Measurement angle 90 °, using magnetic Induction Measurement principle, suitable for measurement edge coatings, narrow tube coatings or small surface area coatings, especially for some small workpiece thickness measurement.

Measurement principle eddy Current, Measurement range 0~1250μm, for detecting the thickness of the nonconductive insulating coating on the nonmagnetic metal substrate (such as aluminum, copper, zinc, tin rubber, plastic, paints, oxide film, etc.), adapted models leeb221, leeb222.

Measurement principle: magnetic Induction, Measurement range 0~1250μm, adaptable model leeb242, equipped with a printer, can print out the measurement data.