Coating Thickness Gauge

Eddy Current, measurement range 0~1500μm, error range +/- 1μm/2%, resolution 0.1μm, minimum measurement surface 10x10mm, support USB data transfer, can store up to 2,000 measurement values.

Magnetic Induction + eddy Current, measurement range 0~1500μm, error range +/- 1μm/2%, resolution 0.1μm, minimum measurement surface 10x10mm, colorful high-resolution color graphics display, support multiple operating languages.

Calibration method "rough" can avoid the problem of thickness measurement accuracy deviation caused by surface roughness; continuous measurement, with Bluetooth communication;

For iron-based and non-iron-based coatings thickness measurement, with wire probe, to meet the different metal substrate measurement, thickness measurement range of 0~2000μm, error +/- 2%, in line with ISO, DIN, BS, ASTM standards.

Iron copper base dual-use measurable, 1.5mm range, continuous measurement, 10w Data storage ， +/- 0.75% accuracy, Bluetooth wireless transmission belt software.

Thickness Gauge host, probe need to be purchased separately. With continuous Measurement mode and Pin code protection function, equipped with QN9 software, can be connected to PC online measurement, Protection level IP64.

Thickness Gauge host, probe needs to be purchased separately. Support a variety of Calibration methods, can store 2000000 readings, the display screen can be turned over from multiple angles, and the shell contains fiberglass.

Magnetic Induction + eddy Current, measurement range 10~3000μm, error range +/- 2μm/2%, resolution 0.1μm, with 3000μm measurement range, free calibrated measurement, backlight display, one key calibrated, online statistics, sound signal when recording readings and many other functions.

Display accuracy 0.1μm, display 2 inch wide Viewing Angle omnidirectional IPS-TFT color LCD, power supply 2xAA alkaline battery, battery life meets 40,000 previous measurements, statistical function average, MAX Maximum, MIN Minimum, standard deviation, measurement speed ≥ 100/min, measurement accuracy (Fe mode ) +/- ( 1μm + 2% reading) @0-2mm or +/- 5% reading @> 2mm, measurement accuracy (NFe mode ) +/- ( 2μm + 2% reading) @0-2mm or +/- 5% reading Number @> 2mm.

Display accuracy 0.1μm, power supply 2xAA alkaline battery, battery life to meet the 40,000 above the measurement, measurement range 3mm, principle based on the Hall principle of magnetic substrate measurement and magnetic eddy current measurement of nonmagnetic substrate, measurement speed ≥ 100/min.

Measurement range 0-500μm, Accuracy +/- (0.7um + 1%), minimum headroom height 85mm, minimum sample diameter 3mm, zero calibrated, memory 1000, data transfer USB2.0.