Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$187.00
SE
QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 6 Tooth
6 teeth1mm、2mm、3mm
1 + 2 + 3mm tooth spacing; 6 teeth; multi-blade swirl/spin head; in line with ISO2409 standard.
$178.00
SE
QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 11 Tooth
11 teeth1mm、2mm、3mm
QFH comes standard with 1mm/2mm/3mm cutter heads, which comply with ISO2409-1974 standards and are suitable for organic coating coating testing.
Login
MODERNER QFH 1mm (5 slots) Cross Hatch Cutter Number 6
6 teeth1mm0 ~ 60µm
1Mm cutter tooth spacing; 6 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.
$972.00
SE
Germany erichsen 295/I Lacquered Cross Hatch Cutter Set 6 teeth/1mm
6 teeth1mm0~60μm
Login
MODERNER QFH 1mm (10 slots) Cross Hatch Cutter 11 blade 1mm pitch
11 teeth1mm< 60μm
1Mm cutter tooth spacing; 11 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.
Login
MODERNER QFH 2mm (5-slot) Cross Hatch Cutter for organic coatings cross-cut adhesion determination
6 teeth2mm
The number of teeth is 6, the distance between the teeth is 2mm, the material of the instrument is plastic, the application standard ISO 2409, and the number of blades is 3.
Login
MODERNER QFH 3mm (5 slots) Cross Hatch Cutter film coating adhesion test
6 teeth3mm60~120μm
Login
MODERNER QFH 2mm (10 slots) Cross Hatch Cutter 11 Blades 2mm Pitch
11 teeth2mm60 ~ 100µm
11 teeth, knife tooth spacing 2mm, instrument material wood, application standard ISO 2409, suitable for film thickness environment 60~100μm, the number of blades 3.
Login
MODERNER QFH 3mm × 5 Cross Hatch Cutter 6 teeth 3mm pitch
6 teeth3mm60 ～ 150μ m
Single cutter head, 6 teeth/3mm spacing, using wooden handle, in line with ISO2409 standard, suitable for Film thickness 60~150μm.
Login
MODERNER 3mm × 5 single edge cross-cut cutter head 3mm pitch 6 teeth
6 teeth3mm60 ～ 150μ m
Single cutter head, 6 teeth/3mm spacing, in line with ISO2409 standard, suitable for Film thickness 60~150μm.
$1078.00
SE
Germany Erichsen 295/V Paint film adhesion Cross Hatch Cutter set 11 teeth/1mm
11 teeth1mm0~50μm
$912.00
SE
Netherlands TQC VF1847 Cross Hatch Cutter Set CC1000 Series Cross Hatch Cutter
11 teeth1.5mm50~125μm
The number of teeth is 11 teeth, the spacing between teeth is 1.5mm, the instrument material is vacuum hardened stainless steel, aluminum, rubber, the application standard ASTM D3359-2009, suitable for film thickness environment 50~ 125μm.
$176.00
SE
QFH-A cross-cut adhesion Tester YONGLIDA standard 3 swirl/spin cutter heads
6 teeth1mm、2mm、3mm
The QFH-A cross-cut adhesion Tester is equipped with three swirl/spin cutter heads with a spacing of 1mm, 2mm, and 3mm. The QFH-A cross-cut adhesion Tester is designed according to the standard ISO2409 and is suitable for GB/T9286 standards.
$179.00
SE
PUSHEN HGQ 2 * 5 multi-edge cross-cut Tester number of teeth 6 teeth, spacing 2mm
6 teeth2mm60~120μm
$776.00
SE
TQC VF2357 cross-cut blade 6 teeth 2mm for CC1000 series
6 teeth2mm0~60µm (soft substrate)
$778.00
SE
TQC VF2358 cross-cut blade 6 teeth 3mm for CC1000 series
6 teeth3mm0 to 60 µm (solid substrate)
$773.00
SE
Dutch TQC VF1861 cross-cut cutter head for CC1000 series Cross Hatch Cutter
6 teeth1.5mm50~125μm
Cross-cut cutter head 1,5mm ASTM for CC1000
$778.00
SE
TQC VF2355 cross-cut blade 6 teeth 1mm for CC1000 series
6 teeth1mm0 to 60 µm (solid substrate)
$783.00
SE
TQC VF2359 cross-cut blade 11 teeth 1mm for CC1000 series
11 teeth1mm0~60µm (soft substrate)
Multi-blade, number of teeth 11, spacing 1mm; sharp wear-resistant stainless steel material; meets ASTM3359 standard; for soft substrates within 60μm.
$179.00
SE
Pushen HGQ 1 * 5 Multi-blade Cross Hatch Cutter Suitable for hard substrates less than 60μm
6 teeth1mm0 to 60 µm (solid substrate)
1mm cutter tooth spacing, 6 teeth; 1 multi-edge stainless steel swirl/spin cutter head; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
$130.00
SE
QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads
6 teeth1mm、2mm
The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.
$179.00
SE
PUSHEN HGQ 2 * 10 multi-blade, paint film cross-cut Tester number of teeth 11 teeth, spacing 2mm
11 teeth2mm60~120μm
2Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ISO2409 standards.
$179.00
SE
PUSHEN HGQ 3 * 5 Cross Hatch Cutter Number of teeth 6 teeth, pitch 3mm
6 teeth3mmSuitable for hard substrate samples larger than 120 μm
3Mm cutter tooth spacing, 6 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; applicable > 120um film thickness; in line with GB/T9286, ISO2409 standards.
$179.00
SE
PUSHEN HGQ 1 * 10 Multi-blade Cross Hatch Cutter Number of teeth 11 teeth, pitch 1mm
11 teeth1mm0 to 60 µm (solid substrate)
1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
Login
MODERNER 2mm × 5 single edge cross-cutting cutter head 2mm pitch 6 teeth
6 teeth2mm60～100μm
If you don't know how to choose "Cross-Cut Tester", please consult customer service.