Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$133.00
SE
TRUIT TR 5006A Multifunctional cross-cut board cross-cut 7, 11
7、111、1.5、2、3mm
Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.
$972.00
SE
Germany erichsen 295/I Lacquered Cross Hatch Cutter Set 6 teeth/1mm
6 teeth1mm0~60μm
$145.00
SE
TRUIT TR 5001/4 Single Sided Cross Hatch Cutter 2mm/6 Tooth
6 teeth2mmFilm thickness 61μm~ 120μm hard substrate or thickness < 120μm soft substrate (wood, plastic)
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 2mm, a number of teeth 6, and a single working face.
$145.00
SE
TRUIT TR 5001/1 adhesion Cross Hatch Cutter 1mm/6 teeth
6 teeth1mmHard substrates (metal) with film thickness < 60 μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, knife pitch 1mm, number of teeth 6, single working face.
$145.00
SE
TRUIT TR 5001/5 Single Face Cross Hatch Cutter 3mm/6 Teeth
6 teeth3mmHard substrate or soft substrate with film thickness 121μm~ 250μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 3mm, a number of teeth 6, and a single working face.
$145.00
SE
TRUIT TR 5001/2 Cross-cut adhesion instrument 1mm/11 teeth
11 teeth1mmHard substrates (metal) with film thickness < 60 μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with 1mm knife spacing, 11 teeth, and a single working face.
$145.00
SE
TRUIT TR 5001/3 Single top coat Cross Hatch Cutter 1.5mm/11 teeth
11 teeth1.5mmFilm thickness 61μm~ 120μm hard substrate or thickness < 120μm soft substrate (wood, plastic)
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 1.5mm, 11 teeth, and a single working face.
$145.00
SE
TRUIT TR 5006/1 coating cross-cut plate cross-cut number 11
111mm
Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 1mm, with 600 type tape and nylon brush.
$145.00
SE
TRUIT TR 5006/1.5 adhesion cross-cut plate cross-cut number 11
111.5mm
Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 1.5mm, with 600 type tape and nylon brush.
$145.00
SE
TRUIT TR 5006/3 cross-cut plate cross-cut number 6
63mm
Using 304 stainless steel, cross-cut length 35mm, cross-cut number 6, cross-cut spacing 3mm, with 600 type tape and nylon brush.
$326.00
SE
TQC SP3000 Adhesion Tester Cross-cut Guide Gauge/Baige Plate 6-in-1 Multifunctional Adhesion Tester
6 teeth/11 teeth1mm、1.5mm、2mm、3mm
6 teeth/11 teeth, knife tooth spacing 1mm, 1.5mm, 2mm, 3mm, instrument material stainless steel, application standard ISO 2409:2003, ASTM D3359
$363.00
SE
TQC SP1705 cross-cut cutter head 11 teeth, spacing 1mm Suitable for CC2000/CC3000 series
11 teeth1mm0~50µm
Number of teeth 11, tooth spacing 1mm; Coating thickness within 50μm; ASTM 3359 standard.
$179.00
SE
PUSHEN HGQ 2mm single-edged paint film cross-cut instrument, standard with 2 2mm single-edged cutter heads, 11 teeth
11 teeth2mm
2Mm cutter tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$912.00
SE
Netherlands TQC VF1847 Cross Hatch Cutter Set CC1000 Series Cross Hatch Cutter
11 teeth1.5mm50~125μm
The number of teeth is 11 teeth, the spacing between teeth is 1.5mm, the instrument material is vacuum hardened stainless steel, aluminum, rubber, the application standard ASTM D3359-2009, suitable for film thickness environment 50~ 125μm.
$179.00
SE
Pushen HGQ 1mm Single Blade Cross Hatch Cutter for Determination of Adhesion by Coating Cross-cut Method
11 teeth1mm、2mm
1mm + 2mm tooth spacing; 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$179.00
SE
PUSHEN HGQ 2 * 5 multi-edge cross-cut Tester number of teeth 6 teeth, spacing 2mm
6 teeth2mm60~120μm
$773.00
SE
Dutch TQC VF1861 cross-cut cutter head for CC1000 series Cross Hatch Cutter
6 teeth1.5mm50~125μm
Cross-cut cutter head 1,5mm ASTM for CC1000
$179.00
SE
PUSHEN HGQ 1mm Single Blade Cross Hatch Cutter Standard 2 1mm Single Blade Cross-cut Testers
11 teeth1mm
1Mm tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$783.00
SE
TQC VF2359 cross-cut blade 11 teeth 1mm for CC1000 series
11 teeth1mm0~60µm (soft substrate)
Multi-blade, number of teeth 11, spacing 1mm; sharp wear-resistant stainless steel material; meets ASTM3359 standard; for soft substrates within 60μm.
$179.00
SE
Pushen HGQ 1 * 5 Multi-blade Cross Hatch Cutter Suitable for hard substrates less than 60μm
6 teeth1mm0 to 60 µm (solid substrate)
1mm cutter tooth spacing, 6 teeth; 1 multi-edge stainless steel swirl/spin cutter head; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
$179.00
SE
PUSHEN HGQ 2 * 10 multi-blade, paint film cross-cut Tester number of teeth 11 teeth, spacing 2mm
11 teeth2mm60~120μm
2Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ISO2409 standards.
$179.00
SE
PUSHEN HGQ 3 * 5 Cross Hatch Cutter Number of teeth 6 teeth, pitch 3mm
6 teeth3mmSuitable for hard substrate samples larger than 120 μm
3Mm cutter tooth spacing, 6 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; applicable > 120um film thickness; in line with GB/T9286, ISO2409 standards.
$179.00
SE
PUSHEN HGQ 1 * 10 Multi-blade Cross Hatch Cutter Number of teeth 11 teeth, pitch 1mm
11 teeth1mm0 to 60 µm (solid substrate)
1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
If you don't know how to choose "Cross-Cut Tester", please consult customer service.