Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$187.00
SE
QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 6 Tooth
6 teeth1mm、2mm、3mm
1 + 2 + 3mm tooth spacing; 6 teeth; multi-blade swirl/spin head; in line with ISO2409 standard.
$133.00
SE
TRUIT TR 5006A Multifunctional cross-cut board cross-cut 7, 11
7、111、1.5、2、3mm
Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.
$178.00
SE
QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 11 Tooth
11 teeth1mm、2mm、3mm
QFH comes standard with 1mm/2mm/3mm cutter heads, which comply with ISO2409-1974 standards and are suitable for organic coating coating testing.
Login
MODERNER QFH 1mm (5 slots) Cross Hatch Cutter Number 6
6 teeth1mm0 ~ 60µm
1Mm cutter tooth spacing; 6 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.
$130.00
SE
QFH cross-cut Tester QFH-A600 JFL Adhesion Tester organic coating adhesion
6 teeth/11 teeth1mm、2mm0 ~ 60µm
Login
MODERNER QFH 1mm (10 slots) Cross Hatch Cutter 11 blade 1mm pitch
11 teeth1mm< 60μm
1Mm cutter tooth spacing; 11 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.
$145.00
SE
TRUIT TR 5001/1 adhesion Cross Hatch Cutter 1mm/6 teeth
6 teeth1mmHard substrates (metal) with film thickness < 60 μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, knife pitch 1mm, number of teeth 6, single working face.
$145.00
SE
TRUIT TR 5001/2 Cross-cut adhesion instrument 1mm/11 teeth
11 teeth1mmHard substrates (metal) with film thickness < 60 μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with 1mm knife spacing, 11 teeth, and a single working face.
$145.00
SE
TRUIT TR 5006/3 cross-cut plate cross-cut number 6
63mm
Using 304 stainless steel, cross-cut length 35mm, cross-cut number 6, cross-cut spacing 3mm, with 600 type tape and nylon brush.
$176.00
SE
QFH-A cross-cut adhesion Tester YONGLIDA standard 3 swirl/spin cutter heads
6 teeth1mm、2mm、3mm
The QFH-A cross-cut adhesion Tester is equipped with three swirl/spin cutter heads with a spacing of 1mm, 2mm, and 3mm. The QFH-A cross-cut adhesion Tester is designed according to the standard ISO2409 and is suitable for GB/T9286 standards.
$179.00
SE
Pushen HGQ 1mm Single Blade Cross Hatch Cutter for Determination of Adhesion by Coating Cross-cut Method
11 teeth1mm、2mm
1mm + 2mm tooth spacing; 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$179.00
SE
PUSHEN HGQ 1mm Single Blade Cross Hatch Cutter Standard 2 1mm Single Blade Cross-cut Testers
11 teeth1mm
1Mm tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$179.00
SE
Pushen HGQ 1 * 5 Multi-blade Cross Hatch Cutter Suitable for hard substrates less than 60μm
6 teeth1mm0 to 60 µm (solid substrate)
1mm cutter tooth spacing, 6 teeth; 1 multi-edge stainless steel swirl/spin cutter head; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
$130.00
SE
QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads
6 teeth1mm、2mm
The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.
$179.00
SE
PUSHEN HGQ 1 * 10 Multi-blade Cross Hatch Cutter Number of teeth 11 teeth, pitch 1mm
11 teeth1mm0 to 60 µm (solid substrate)
1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
If you don't know how to choose "Cross-Cut Tester", please consult customer service.