Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$146.00
SE
TRUIT TR 5001/4 Single Sided Cross Hatch Cutter 2mm/6 Tooth
6 teeth2mmFilm thickness 61μm~ 120μm hard substrate or thickness < 120μm soft substrate (wood, plastic)
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 2mm, a number of teeth 6, and a single working face.
$146.00
SE
TRUIT TR 5001/1 adhesion Cross Hatch Cutter 1mm/6 teeth
6 teeth1mmHard substrates (metal) with film thickness < 60 μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, knife pitch 1mm, number of teeth 6, single working face.
$146.00
SE
TRUIT TR 5001/5 Single Face Cross Hatch Cutter 3mm/6 Teeth
6 teeth3mmHard substrate or soft substrate with film thickness 121μm~ 250μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 3mm, a number of teeth 6, and a single working face.
$146.00
SE
TRUIT TR 5001/2 Cross-cut adhesion instrument 1mm/11 teeth
11 teeth1mmHard substrates (metal) with film thickness < 60 μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with 1mm knife spacing, 11 teeth, and a single working face.
$146.00
SE
TRUIT TR 5001/3 Single top coat Cross Hatch Cutter 1.5mm/11 teeth
11 teeth1.5mmFilm thickness 61μm~ 120μm hard substrate or thickness < 120μm soft substrate (wood, plastic)
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 1.5mm, 11 teeth, and a single working face.
$181.00
SE
PUSHEN HGQ 2mm single-edged paint film cross-cut instrument, standard with 2 2mm single-edged cutter heads, 11 teeth
11 teeth2mm
2Mm cutter tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$178.00
SE
QFH-A cross-cut adhesion Tester YONGLIDA standard 3 swirl/spin cutter heads
6 teeth1mm、2mm、3mm
The QFH-A cross-cut adhesion Tester is equipped with three swirl/spin cutter heads with a spacing of 1mm, 2mm, and 3mm. The QFH-A cross-cut adhesion Tester is designed according to the standard ISO2409 and is suitable for GB/T9286 standards.
$181.00
SE
PUSHEN HGQ 2 * 5 multi-edge cross-cut Tester number of teeth 6 teeth, spacing 2mm
6 teeth2mm60~120μm
$181.00
SE
PUSHEN HGQ 1mm Single Blade Cross Hatch Cutter Standard 2 1mm Single Blade Cross-cut Testers
11 teeth1mm
1Mm tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$131.00
SE
QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads
6 teeth1mm、2mm
The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.
$181.00
SE
PUSHEN HGQ 2 * 10 multi-blade, paint film cross-cut Tester number of teeth 11 teeth, spacing 2mm
11 teeth2mm60~120μm
2Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ISO2409 standards.
$181.00
SE
PUSHEN HGQ 3 * 5 Cross Hatch Cutter Number of teeth 6 teeth, pitch 3mm
6 teeth3mmSuitable for hard substrate samples larger than 120 μm
3Mm cutter tooth spacing, 6 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; applicable > 120um film thickness; in line with GB/T9286, ISO2409 standards.
$181.00
SE
PUSHEN HGQ 1 * 10 Multi-blade Cross Hatch Cutter Number of teeth 11 teeth, pitch 1mm
11 teeth1mm0 to 60 µm (solid substrate)
1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
$5710.00
SE
HUITAO HT-110 hundred grid method scratch tester, scratch resistance test of automotive plastic interior and exterior trims
The device uses metal scraping needle to cross scribe with 5-15N force, which can measure the color difference before and after scraping. It has two scribing speed and length combinations, nine predetermined cross scribing modes and free program control, and has a wide clamping range and convenient operation.
If you don't know how to choose "Cross-Cut Tester", please consult customer service.