Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$187.00
SE
QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 6 Tooth
6 teeth1mm、2mm、3mm
1 + 2 + 3mm tooth spacing; 6 teeth; multi-blade swirl/spin head; in line with ISO2409 standard.
$133.00
SE
TRUIT TR 5006A Multifunctional cross-cut board cross-cut 7, 11
7、111、1.5、2、3mm
Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.
$178.00
SE
QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 11 Tooth
11 teeth1mm、2mm、3mm
QFH comes standard with 1mm/2mm/3mm cutter heads, which comply with ISO2409-1974 standards and are suitable for organic coating coating testing.
$172.00
SE
JINGKELIAN SISI adhesion board, suitable for measuring the surface paint film of plastic and wood furniture
11 teeth1mm、1.5mm、2mm、3mm
SISI adhesion hundred grid board, also known as guide grid gauge, cut mark spacing 1mm, 1.5mm, 2mm, 3mm, cut mark length 35mm, cut mark number 11, in line with the standard BS3962-6, GB4893.4-85.
Login
MODERNER QFH 1mm (5 slots) Cross Hatch Cutter Number 6
6 teeth1mm0 ~ 60µm
1Mm cutter tooth spacing; 6 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.
$130.00
SE
QFH cross-cut Tester QFH-A600 JFL Adhesion Tester organic coating adhesion
6 teeth/11 teeth1mm、2mm0 ~ 60µm
Login
MODERNER QFH 1mm (10 slots) Cross Hatch Cutter 11 blade 1mm pitch
11 teeth1mm< 60μm
1Mm cutter tooth spacing; 11 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.
$145.00
SE
TRUIT TR 5001/1 adhesion Cross Hatch Cutter 1mm/6 teeth
6 teeth1mmHard substrates (metal) with film thickness < 60 μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, knife pitch 1mm, number of teeth 6, single working face.
$145.00
SE
TRUIT TR 5001/2 Cross-cut adhesion instrument 1mm/11 teeth
11 teeth1mmHard substrates (metal) with film thickness < 60 μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with 1mm knife spacing, 11 teeth, and a single working face.
$145.00
SE
TRUIT TR 5006/1 coating cross-cut plate cross-cut number 11
111mm
Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 1mm, with 600 type tape and nylon brush.
$176.00
SE
QFH-A cross-cut adhesion Tester YONGLIDA standard 3 swirl/spin cutter heads
6 teeth1mm、2mm、3mm
The QFH-A cross-cut adhesion Tester is equipped with three swirl/spin cutter heads with a spacing of 1mm, 2mm, and 3mm. The QFH-A cross-cut adhesion Tester is designed according to the standard ISO2409 and is suitable for GB/T9286 standards.
$179.00
SE
Pushen HGQ 1mm Single Blade Cross Hatch Cutter for Determination of Adhesion by Coating Cross-cut Method
11 teeth1mm、2mm
1mm + 2mm tooth spacing; 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$179.00
SE
PUSHEN HGQ 1mm Single Blade Cross Hatch Cutter Standard 2 1mm Single Blade Cross-cut Testers
11 teeth1mm
1Mm tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$179.00
SE
Pushen HGQ 1 * 5 Multi-blade Cross Hatch Cutter Suitable for hard substrates less than 60μm
6 teeth1mm0 to 60 µm (solid substrate)
1mm cutter tooth spacing, 6 teeth; 1 multi-edge stainless steel swirl/spin cutter head; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
$130.00
SE
QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads
6 teeth1mm、2mm
The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.
$179.00
SE
PUSHEN HGQ 1 * 10 Multi-blade Cross Hatch Cutter Number of teeth 11 teeth, pitch 1mm
11 teeth1mm0 to 60 µm (solid substrate)
1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.
If you don't know how to choose "Cross-Cut Tester", please consult customer service.