Cross-Cut Tester

1 + 2 + 3mm tooth spacing; 6 teeth; multi-blade swirl/spin head; in line with ISO2409 standard.

Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.

QFH comes standard with 1mm/2mm/3mm cutter heads, which comply with ISO2409-1974 standards and are suitable for organic coating coating testing.

SISI adhesion hundred grid board, also known as guide grid gauge, cut mark spacing 1mm, 1.5mm, 2mm, 3mm, cut mark length 35mm, cut mark number 11, in line with the standard BS3962-6, GB4893.4-85.

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 2mm, a number of teeth 6, and a single working face.

The number of teeth is 6, the distance between the teeth is 2mm, the material of the instrument is plastic, the application standard ISO 2409, and the number of blades is 3.

11 teeth, knife tooth spacing 2mm, instrument material wood, application standard ISO 2409, suitable for film thickness environment 60~100μm, the number of blades 3.

Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 2mm, with 600 type tape and nylon brush.

The QFH-A cross-cut adhesion Tester is equipped with three swirl/spin cutter heads with a spacing of 1mm, 2mm, and 3mm. The QFH-A cross-cut adhesion Tester is designed according to the standard ISO2409 and is suitable for GB/T9286 standards.

1mm + 2mm tooth spacing; 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.

2Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ISO2409 standards.