Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$187.00
SE
QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 6 Tooth
6 teeth1mm、2mm、3mm
1 + 2 + 3mm tooth spacing; 6 teeth; multi-blade swirl/spin head; in line with ISO2409 standard.
$133.00
SE
TRUIT TR 5006A Multifunctional cross-cut board cross-cut 7, 11
7、111、1.5、2、3mm
Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.
$178.00
SE
QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 11 Tooth
11 teeth1mm、2mm、3mm
QFH comes standard with 1mm/2mm/3mm cutter heads, which comply with ISO2409-1974 standards and are suitable for organic coating coating testing.
$172.00
SE
JINGKELIAN SISI adhesion board, suitable for measuring the surface paint film of plastic and wood furniture
11 teeth1mm、1.5mm、2mm、3mm
SISI adhesion hundred grid board, also known as guide grid gauge, cut mark spacing 1mm, 1.5mm, 2mm, 3mm, cut mark length 35mm, cut mark number 11, in line with the standard BS3962-6, GB4893.4-85.
$145.00
SE
TRUIT TR 5001/5 Single Face Cross Hatch Cutter 3mm/6 Teeth
6 teeth3mmHard substrate or soft substrate with film thickness 121μm~ 250μm
Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 3mm, a number of teeth 6, and a single working face.
Login
MODERNER QFH 3mm (5 slots) Cross Hatch Cutter film coating adhesion test
6 teeth3mm60~120μm
Login
MODERNER QFH 3mm × 5 Cross Hatch Cutter 6 teeth 3mm pitch
6 teeth3mm60 ～ 150μ m
Single cutter head, 6 teeth/3mm spacing, using wooden handle, in line with ISO2409 standard, suitable for Film thickness 60~150μm.
Login
MODERNER 3mm × 5 single edge cross-cut cutter head 3mm pitch 6 teeth
6 teeth3mm60 ～ 150μ m
Single cutter head, 6 teeth/3mm spacing, in line with ISO2409 standard, suitable for Film thickness 60~150μm.
$145.00
SE
TRUIT TR 5006/3 cross-cut plate cross-cut number 6
63mm
Using 304 stainless steel, cross-cut length 35mm, cross-cut number 6, cross-cut spacing 3mm, with 600 type tape and nylon brush.
$176.00
SE
QFH-A cross-cut adhesion Tester YONGLIDA standard 3 swirl/spin cutter heads
6 teeth1mm、2mm、3mm
The QFH-A cross-cut adhesion Tester is equipped with three swirl/spin cutter heads with a spacing of 1mm, 2mm, and 3mm. The QFH-A cross-cut adhesion Tester is designed according to the standard ISO2409 and is suitable for GB/T9286 standards.
$179.00
SE
PUSHEN HGQ 3 * 5 Cross Hatch Cutter Number of teeth 6 teeth, pitch 3mm
6 teeth3mmSuitable for hard substrate samples larger than 120 μm
3Mm cutter tooth spacing, 6 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; applicable > 120um film thickness; in line with GB/T9286, ISO2409 standards.
If you don't know how to choose "Cross-Cut Tester", please consult customer service.