$346.00
SE
JINGKELIAN QTY-32-III Film Bending tester cylindrical mandrel bending test machine, film flexibility
≤1.0mm
The diameter of the shaft rod is 2-32mm, a total of 13 pieces, the thickness of the test plate is less than or equal to 1.0mm, the length is 120-150mm, the width is less than 80mm, and the bending is 180 degrees to evaluate the cracking or disbonding performance of the coating.
$541.00
SE
JINGKELIAN QZW T-bending test machine Color plate or strip film flexibility test
According to GB/T1 2754-91 standard design, the test bending angle is less than 45 degrees, which is suitable for testing the bending test of color steel plates and steel strips and other coatings.
$241.00
SE
Determination of cracking resistance and elongation of JINGKELIAN QTZ Conical Mandrel Bending Tester coatings
≤0.8mm
The mechanical Tester for measuring varnish and Paints coatings can evaluate the cracking performance and elongation of coatings when they are bent around conical mandrel under standard conditions. It conforms to a variety of international or national standards, such as ISO6860-1984 (E), ASTMD522-60 (1979), BS3900; Part E11:1985, etc.
$281.00
SE
JINGKELIAN QTY-32 cylindrical mandrel bending Tester to determine the ability of the paint film to deform with the substrate without damage
≤ 1.0mm (polished steel plate, tinplate)
QTY-32 cylindrical mandrel bending Tester evaluates the flexibility of paint film, with shaft rod diameter 2, 3, 4, 5, 6, 8, 12, 16, 20, 25, 32mm, in line with standards GB/T6742-86, ISO1519-73, ASTMD522, DIN53152
$229.00
SE
JINGKELIAN QTY-10A cylindrical mandrel bending Tester, eight different diameters cylindrical mandrel
Shaft rod size 2/3/4/5/6/8/10/12mm, surface size 200 × 58 × 14mm, bending shaft material stainless steel.
If you don't know how to choose "Bending Tester", please consult customer service.