Film Imapct Tester

The impact speed is 3.5m/s, the strike center distance is 322mm, and the pendulum lift angle is 160 °. It adopts a high-precision swirl/spin encoder to automatically correct the energy loss caused by friction and wind resistance.

Impact height 0-100cm (0-40inch), Impact height Graduation 1cm, for testing Paints, varnishes or related products of dry coatings against cracking or flaking ability from the substrate.

The impact speed is 3.8m/s, the strike center distance is 380mm, and the pendulum lift angle is 160 °. It is controlled by single-chip microcomputer to automatically correct the energy loss caused by friction and wind resistance and calculate the impact strength.

Film thickness is less than 2mm plastic sheet, the test height of 300mm~ 600mm, different ball height adjustable, foot switch start mode, steel ball electromagnetic suction hanging, automatic release.

In line with GB 9639.1 standard, color touch screen, with A, B dual mode design, Measurement range A method: 50~2000g, B method: 300~2000g, fixture inner diameter φ 125mm.

Impact Energy range 3J, minimum scale value of 0.01J, pendulum swing radius R280mm, specimen holder diameter φ 60, φ 89mm, used to determine the anti-pendulum Impact of Plastic film, sheet, composite film.

The impact speed is 2.9m/s, the strike center distance is 230mm, and the pendulum lift angle is 150 °. It is controlled by a single-chip microcomputer to automatically correct the energy loss caused by friction and wind resistance, and automatically calculate the impact strength of the sample.

Cantilever beam 1/2.75/5.5J, simply supported beam 0.5/1/2/4/5 J, using semi-automatic control, LCD display supports printout.

Digital display, swirl/spin encoder garden grating angle measurement technology, Impact speed 2.9m/s, the distance from the center of the pendulum to the center of the sample is 221mm, in line with IS0 179, GB/T 1043, JB/T 8762 standards.