Defelsko PosiTest AT-A 20mm Pull-off adhesion Tester 20mm kit size

Introduction

The Defelsko Pull-Off Adhesion Tester PosiTest AT-A 20mm uses a 20mm jack and is suitable for a maximum adhesion of 350psi, unlike the manual typePosiTest AT-M 20mm，PosiTest AT-A 20mmThe pull-off adhesion Tester is fully automatic, and the electronically controlled hydraulic pump automatically generates a smooth and continuous pull-out force, which greatly reduces the impact of the manual pull-out process on the measurement results due to uneven force on the operator. The pull-off adhesion Tester is operated and controlled by a touch keyboard, and the shell has the advantages of waterproof and dustproof.

Features

1. Color LCD screen, touch button operation, no need to wear gloves.

2. The electronically controlled hydraulic pump automatically produces a smooth and continuous pulling force. Reduce the influence of uneven force on the measurement results caused by manual operation of the staff.

3. Built-in rechargeable battery, each charge can be continuously tested 200 times. While the battery is charging, AC power can also be used for testing.

4. It adopts environmentally friendly sealed shell, which fully conforms to and exceeds IP65 level, and has strong waterproof, dustproof and shockproof characteristics.

5. Rubber grip with adsorption, the base is stable and non-slip.

6. Automatically align and position the top sub, so that it can be accurately measured on smooth or rough surfaces.

7. There are 10, 14, 20 and 50mm jacks to choose from to meet the test needs of different adhesion ranges.

10mm: 1400psi (96MPa); 14mm：7000psi(50MPa)；20mm：3500psi(24MPa)；50mm：560psi(3.8MPa)

8. The user can adjust the tensile rate, the limit of the tensile force and the holding time.

9、PosiTest AT-A 20mmPull-off adhesIon MeterIt can be tested horizontally or vertically, and the LCD display can be rotated.

10. The pressure system is calibrated by traceable NIST load cell, and the accuracy reaches ±1% (full scale)

Product structure diagram

Product interface diagram

Positector APP features

1. Add pictures or text through the camera or keyboard.

2. Create customized, professional PDF reports.

3. Measurement data can be shared, backed up, synchronized and recorded.

4. Automatic pairing Bluetooth (BLE) connection.

5. Check the help manual to learn how to use it.

Meets standards

The Defelsko Pull-Off Adhesion Tester PosiTest AT-A complies with a variety of international standards, including ASTM D4541,ASTM D7234、ISO 4624、ISO 16276-1, AS/NZS 1580.408.5 and others.

Storage and recording features

1、The built-in memory of the adhesIon Meter can store up to 100,000 pieces of data(including tensile force value, pressurization rate, test time, and top size), which can be divided into 1000 groups.

2. Record the adhesion test results (pass/fail) and the firmness of adhesion (good, fair, poor).

3. You can install the free Positector APP on your mobile device and connect wirelessly. (Available for IOS and Android)

Actual picture of the product

PosiTest AT-A 50mm and 20mm comparison

Host x1, 20mm aluminum alloy kit x20, sanding pad x1, edge trimmer x1, adhesive (including rubber plate and glue stick) x1, cotton swab x1, USB data x1, operation manual x1, verification certificate x1, demonstration disc x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.