Elcometer 107/1 F10713348-6C Cross Cutter, complete set with ISO tape, including calibrating certificate

Elcometer 107 series Cross Hatch Cutter, including ISO tape, with calibrating certificate, knife teeth 6, knife tooth spacing 1mm, suitable for 0~60µm paint film cross-cut test, genuine imported from the UK.

Brand

SKU: NB012178

Elcometer

Model

F10713348-6C

Get Quote

Elcometer shopSE

Information

Datasheet Catalog Manual

What else did others buy

Germany Erichsen 295/V Paint film adhesion Cross Hatch Cutter set 11 teeth/1mm

$ 1078.00
Shanghai PUSHEN 3mm * 6 Tooth Cross Hatch Cutter

$ 148.00
TRUIT TR 5006/1 coating cross-cut plate cross-cut number 11

$ 145.00
TQC SP3209 dust test tape for evaluating the size and size of surface dust

$ 158.00
TRUIT TR 5006/2 adhesion cross-cut plate cross-cut number 11

$ 145.00

Genuinegoods

Elcometer F10713348-6C Cross cutterOverview
Specifications
Comments
FAQs

F10713348-6C

Cross cutter

The Elcometer 107 provides an instant assessment of the quality of the bond on the substrate. Due to its robust construction, it is suitable for thin, thick or hard coatings on all surfaces. It is a customized field or laboratory test.

Robust design
The handle is large and non-slip
Suitable for thin, thick or hard coatings
4-sided blades are quickly replaceable and enable measurement of adhesion over a wide range of thicknesses (1mm, 1.5mm, 2mm and 3mm)

The Elcometer 107 Cross Scribe is available in basic and complete sets.

elcometer 107 cross hatcher

Technical specifications

part number	Product Description	ISO	ASTM	Certificate
T99913700-1	6 x 1mm four-sided blades	â¢	â¢	Î¿
T99913700-2	11 x 1mm four-sided blade		â¢	Î¿
T99913700-3	11 x 1.5mm four-sided blade			Î¿
T99913700-4	6 x 2mm four-sided blades	â¢	â¢	Î¿
T99913700-5	6 x 3mm four-sided blades	â¢		Î¿
K0001539M001	Adhesion Tape (1 roll) ASTM D 3359		â¢
K0001539M002	Adhesion tape (1 roll) ISO 2409	â¢
T9998894-	Adhesion Tape (2 rolls) ASTM D 3359		â¢
T9999358-	Adhesion tape (2 rolls) ISO 2409	â¢

â Calibration certificate optional

Elcometer 107 Series Comparison

part number	Product Description	Cutter wheel type	coating thickness		Certificate
F10713222-1	Elcometer 107 Basic Set	6 x 1mm	0 - 60Âµm	0-2.0mils	Î¿
F10713348-6	Elcometer 107 complete set including ISO tape	6 x 1mm	0 - 60Âµm	0-2.0mils	Î¿
F10713348-1	Elcometer 107 complete set with ASTM tape	6 x 1mm	0 - 50Âµm	0-2.0mils	Î¿
F10713222-2	Elcometer 107 Basic Set	11x1mm	0 - 50Âµm	0-2.0mils	Î¿
F10713348-2	Elcometer 107 complete set with ASTM tape	11x1mm	0 - 50Âµm	0-2.0mils	Î¿
F10713222-3	Elcometer 107 Basic Set	11x1.5mm	0 - 90Âµm1	0 - 3.5mils1	Î¿
F10713222-4	Elcometer 107 Basic Set	6 x 2mm	0 - 125Âµm	0-5.0mils	Î¿
F10713348-9	Elcometer 107 complete set including ISO tape	6 x 2mm	0 - 120Âµm	0-5.0mils	Î¿
F10713348-4	Elcometer 107 complete set with ASTM tape	6 x 2mm	50-125Âµm	2.0-5.0mils	Î¿
F10713222-5	Elcometer 107 Basic Set	6 x 3mm	121-250Âµm	5.0-10mils	Î¿
packing list	Basic set: Sturdy handle, blade, hex wrench, carrying case and operating manual (with adhesion test result chart grades)
packing list	Complete set: Sturdy handle, blade, hex wrench, operating manual (with adhesion test result chart grades), sight glass, brush and adhesion tape (ASTM or ISO tape), all in a plastic ABS carrying case

â Calibration certificate optional

Comply with standards

AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038

Elcometer F10713348-6C Cross cutterSpecifications

LIST	VALUE
Number of teeth	6 teeth
Tooth spacing	1mm
Application standard	AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038
Applicable film thickness environment	0~60µm
Calibrated Certificate	Yes.

Elcometer F10713348-6C Cross cutter Packing list

Robust handle x1, blade x1, hexagonal wrench x1, operation manual x1, eyepiece (x8) x1, brush and adhesion tape x1, calibrated certificate x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.