Bante900P-CN Portable multiparameter Water Quality Meter

Bante900P Portable pH/Conductivity/Dissolved Oxygen Meter

Multi-parameter portable pH meter, including 8 measurement functions, the meter is suitable for outdoor measurement of liquid pH, redox potential, ion concentration, conductivity, total dissolved solids (TDS), salinity, resistivity, dissolved oxygen concentration and saturation Spend.

pH Mode Features

• Multi-parameter Water Quality Analyzer with large backlit LCD display.

• 1 to 5 point key calibration, automatic identification of pH standard buffer.

• Optional pH buffer standard (USA/NIST/DIN) or 2-point custom calibration.

• Automatic electrode slope display, prompting the user whether to replace the pH electrode.

Functional characteristics of ORP mode

• 1-point offset calibration, allowing adjustment of displayed values to known standards.

• Relative and absolute mV modes provide accurate ORP readings.

Portable pH Meter

Ion Mode Features

• 2 to 5-point key calibration, including 8 optional concentration calibration points.

• Automatic identification of ion-selective electrodes without specifying ion types.

• Directly read the ion concentration value, avoiding cumbersome conversion and calculation.

• Optional concentration units (ppm, mg/L, mol/L) to meet various ion measurement needs.

Conductivity/TDS/salinity/resistivity mode features

• 1 to 5 point key calibration, automatic identification of conductivity standard solution.

• Selectable cell constant (K=0.1/1/10), TDS conversion factor, normalized temperature (20 or 25°C), linear and pure water temperature compensation,

  Seawater and practical salinity measurement modes.

Portable pH Meter

Dissolved Oxygen Mode Features

• 1 or 2 point pushbutton calibration using air saturated water or zero oxygen liquid.

• Compensation for salinity and atmospheric pressure to improve the measurement accuracy of the instrument.

common features

• Automatic temperature compensation to ensure accurate measurement over the full range.

• Automatic Calibration Reminder to remind users to calibrate the meter on a regular basis.

• Automatic end point locking, retaining stable measurement values for easy viewing and recording.

• Automatic electrode diagnosis, you can check the zero offset, electrode slope, range and conductivity K value.

• The system menu can customize 15 functional parameters such as the number of calibration points, stability standard, data lock mode, and automatic shutdown.

• One key reset (Reset) automatically restores the instrument to the factory default settings.

• Expanded memory can store up to 500 sets of measurement data.

• The built-in clock automatically marks the date and time of stored data to comply with GLP regulations.

• USB communication interface to send stored data to PC.

• Multi-mode power supply scheme (battery, power adapter, computer's USB port) ensures the smooth application of the instrument.

Host X1, plastic carrying case X1, E201-BNC type pH electrode X1, Con-1 type Conductivity detector electrode X1, DO100 type dissolved Oxygen electrode (made in the United States) X1, TP-10K type temperature probe X1, pH standard buffer reagent (pH4.01/7.00/10.01) X1, Conductivity detector standard solution (84uS/cm, 1413uS/cm, 12.88mS/cm) X1, dissolved Oxygen electrode filling solution X1, dissolved Oxygen electrode film cap X1, AA type battery X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.