WenTai FET-99S Eddy current Flaw Detector DATASHEET
| Brand | WenTai | Model | FET-99S |
|---|---|---|---|
| From | Name | Eddy current Flaw Detector |
Specifications
| Frequency range | 64Hz~2MHz |
| Gain range | 0-48Db, step distance is 0.5db |
| phase | 0-360 degrees, 1 degree step (automatic phase, amplitude analysis function) |
| Automatic zero correction system | Zero correction interval can be set |
| Alarm function | Different styles of alarm area settings can be applied to various modes |
| gain ratio | 0.1~10.0 |
| Probe adaptation | Adapt to various probes: such as external pass-through, swirl/spin, etc |
| Detection speed | 1m/min～360m/min |
| Display mode | Display modes: Impedance, Time Base |
| Display mode | Solid line, blanking |
| blanking display coefficient | 1~100 |
| Display | liquid crystal display |
| Standby power consumption | < 10W |
| Operating temperature | -15~55℃ |
| Storage temperature | -20~60℃ |
| Relative Humidity | Not more than 85% |
| Operating Voltage | AC220±10V |
Packing list
Eddy current Flaw detector x1 set, LCD screen x1 set, probe x1 piece, alarm x1 set, control box x1 set, signal line x1 piece, probe line x1 piece, power cord x1 set, detection software x1 copy
After-sales instructions
Warranty days: 365 days
1. Three guarantees of the instrument, free warranty for 1 year
2. Provide free technical advice to guide the adjustment of instrument parameters
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/16258/Specification.html , which is only used by users who purchase commodities from the NBCHAO.
Created on : 2025/12/31