JUNSHUN YA-D200-Freon, stationary toxic Gas Detector display + acousto-optic

Overview of Gas Detectors

YA-D200 series freon Detector is a toxic gas alarm developed by Junshun with practical functions and easy operation. The Detector can be selected with or without a display and audible and visual alarm. It can be combined with Junshun's toxic gas alarm controller YA-K100 to form an industrial gas alarm system.

The product adopts wall-mounted installation, through the use of the controller, and through the controller single-chip microcomputer to the Detector uploaded data for various data processing, and finally complete the data display, output control and other functions.

The design, manufacture and inspection of this product comply with the following national standards

GB16808-2008 "Combustible Gas Alarm Controller" national standard per 20 square meters

GB12358-2006 "General Technical Requirements for Workplace Ambient Gas Detection and Alcellors"

GB15322.1-2003 Point Combustible Gas Detector with Measurement Range of 0~100% LEL

Features

Sound and light model: (used with YA-K100/200 series gas alarm controller produced by Junshun) The Detector is placed in the scene prone to gas leakage, when there is gas leakage, the Detector will detect the leakage information, and timely transmit the relevant data to the controller, when it reaches a certain concentration, the Detector will send out an audible and visual alarm (about 70 decibels), and the controller sound and light alarm at the same time, prompting the user that the gas leakage has been detected, and relevant measures should be taken in time to eliminate the danger!

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.