LANDTEK VM6360 Portable Vibration Sensor with Piezoelectric Acceleration Sensors
LANDTEK VM6360 Portable Vibration Meter with Piezoelectric Acceleration Sensors, in line with ISO international standards, VM6360 Acceleration Frequency up to 10Hz~ 10KHz, dedicated to on-site measurement of mechanical vibration. NBchao offers VM6360 Vibration Meter cash sale and 1 year warranty.
LANDTEK
-
Seema AS63A high-precision vibratIon Meter, acceleration 0.1~ 199.9m/s2
$ 165.00 -
LANDTEK VMC-606 Vibrator calibrator
$ 585.00 -
DUBAN DB22-VM260DET Vibrator, Piezoelectric Vibration Sensors Displacement 0.001~ 4.0mm
$ 605.00 -
DUBAN DB22-VM260A Vibration instrument, displacement D 0.001~ 4.0mm
$ 400.00 -
Vibrator AMITTARI AV-160B displays three parameters of "Displacement", "Speed" and "Acceleration"
$ 466.00
Introduction
1. The frequency range is wide, and the frequency can reach 10Hz~10KHz in acceleration mode.
2. VM6360 conforms to international standards ISO2954 and is used for periodic motion measurement to detect the imbalance and deviation of moving machinery.
3. This model vibrometer uses "USB data line output" and "RS-232 data line output" to communicate with the PC.
4. VM6360 uses a high-performance accelerometer to achieve accurate and reproducible measurements.
5. With AC signal output, it is convenient for auscultation and recording.
6. Optional headset as stethoscope.
7. Provide Bluetooth Bluetooth data output option.
8. VM6360 vibrometer is designed for field measurement of various mechanical vibrations, in order to provide data for quality control, running time and prior equipment maintenance.
Live shot
LANDTEK VibratIon MeterSpecifications
| LIST | VALUE |
|---|---|
| monitor | LCD screen |
| Sensor type | Piezoelectric Acceleration Sensors |
| Precision | +/- (5% n + 2) words |
| Measurement range | 0.001~4.000mm |
| Measurement range | 0.01~400mm/s |
| Acceleration Measurement range | 0.1~400.0m/s² |
| Frequency range | 10Hz~1KHz |
| Frequency range | 10Hz~1KHz |
| Acceleration Frequency range | 10 Hz to 1k Hz 10 Hz to 10k Hz (x10 mode for bearing inspection) |
| Operating temperature | 0~50℃ |
| Relative Humidity | <90%RH |
| output | 2.0 v AC load resistance 10 k |
| Dimension | 124*62*30 mm |
| Power Supply | 4 AA batteries |
| Weight | 120 g (without battery) |
| Metric imperial conversion | convertible |
| Battery Voltage indication | Low Voltage prompt |
| Data output | USB, RS-232, Bluetooth |
LANDTEK VibratIon Meter Packing list
Host X1, magnetic suction seat X1, Piezoelectric Sensors X1, probe (cone) X1, probe (ball) X1, portable case X1, instruction manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Large Industrial Universal Testing Machine Selection: Range, Stability and Durability Considerations
- Small Laboratory Universal Testing Machine Selection: Cost-effective Model Recommendation
- Temperature, Humidity and other environmental factors affect the long-term stability of Universal Testing Machine
- How tensile testing devices perform field validation of load sensors (using standard weights)
- Solution of extensometer calibrating and signal drift
- Common Fault Phenomena and Diagnostic Steps of UTM Load Sensor
- Universal Testing Machine Daily Maintenance Checklist (weekly, monthly, annual)
- Universal Testing Machine Fixture type: Wedge, thread, plate, wire fixture, etc
- Difficulty Analysis of Composite Interlayer Tensile Test Standard
- Adhesive lap shear strength standard test method and key points analysis