SADT HTP2210 Portable Leeb Hardness Tester wireless bluetooth digital probe

Introduction

The HTP2210 is a new generation of Leeb Hardness Tester, with a full-Chinese interface and a wireless Bluetooth digital probe. The main unit is wirelessly connected to each type of impact device (probe) and the micro printer, and can be used online at the same time. The main machine automatically recognizes all types of impact devices (probes) and sets them automatically. Full-angle digital probe, test in any direction, no need to manually set the test direction. The wireless printer prints the measurement data on site. The wireless digital probe avoids the problem that the probe wire cannot be used due to long-term wear and internal breakage, and the operation is more flexible and convenient, and the host is placed at will, not restricted by the probe wire. It is especially suitable for working at height or in confined spaces for one-man operation.

The wireless probe is equipped with a lithium-ion rechargeable battery, which can be charged through the USB port of the computer or the charger of the mobile phone.

HTP2210 host X1, D-type wireless Bluetooth digital probe X1, small support ring X1, D test block X1, AA battery X1, small brush X1, operation manual X1, carrying case X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.