TQC Sheen SH1686 wire rod Film Applicator 150 µm film thickness 180mm film width
TQC Sheen SH1686 wire rod Film Applicator adopts wire-wound process, advanced wear-resistant stainless steel, SH1686 wire rod Film Applicator has a film thickness of 150 microns and an application width of 180mm.
TQC sheen
SH1686
-
RDS 27 #3/8 "Mayer Rods Coating Wire-wound drawdown Bar 61.7μm
$ 161.00 -
Japan OSP-02/250 scraping reticulated stick WFT 2μm manual scraping device
$ 152.00 -
Japan OSP-120/60 Applicator rod WFT 120μm length 60mm
$ 115.00 -
Japan OSP OSP-180T L250 Applicator rod WFT 180μm length 250mm
$ 152.00 -
Japan OSP-35/250 steel wire spiral bar WFT 35μm length 250mm
$ 152.00
Introduction
The coating width of the Dutch TQC filament wound experimental coating wire rod is 180mm, and the thickness of the wet film that can be prepared is 0~300μm, which supports customization.
Wire bar applicators, also known as threaded wire bars, are ideal for preparing films on paper or plastic. In addition, it is also suitable for film making on soft substrates. TQC imported scraper is made of stainless steel, which has good acid and alkali resistance. The imported scraper can be used for the automatic coating machine.
Product parameters
| Model | Wet film thickness | Coating width | Overall length | Straightness | Material | craft |
| SH0632 | 0μm | 180 mm | 440mm | < 50 μm | stainless steel | Winding |
| SH0168 | 4μm | |||||
| SH0232 | 6μm | |||||
| SH0262 | 8μm | |||||
| SH0631 | 10μm | |||||
| SH0676 | 12μm | |||||
| SH0700 | 14μm | |||||
| SH0728 | 16μm | |||||
| SH0751 | 18μm | |||||
| SH0799 | 20μm | |||||
| SH0856 | 24μm | |||||
| SH0897 | 26μm | |||||
| SH0921 | 28μm | |||||
| SH0941 | 30μm | |||||
| SH0965 | 32μm | |||||
| SH0978 | 34μm | |||||
| SH0994 | 36μm | |||||
| SH1018 | 42µm | |||||
| SH1042 | 40μm | |||||
| SH1091 | 46μm | |||||
| SH8007 | 48μm | |||||
| SH1144 | 50μm | |||||
| SH1216 | 56μm | |||||
| SH1231 | 60μm | |||||
| SH1266 | 66μm | |||||
| SH1280 | 70μm | |||||
| SH1314 | 76μm | |||||
| SH1341 | 80μm | |||||
| SH1372 | 88μm | |||||
| SH0326 | 100μm | |||||
| SH0797 | 120μm | |||||
| SH0919 | 128μm | |||||
| SH1686 | 150μm | |||||
| SH0329 | 200μm | |||||
| SH0338 | 300μm | |||||
| SH2005 | customize |
Optional
|
|
|
TQC sheen SH1686 Mayer RodsSpecifications
| LIST | VALUE |
|---|---|
| Production process | Wire-wound |
| WFT | 150μm |
| Total length | 300mm |
| Application width | 180mm |
| grip width | 60+60mm |
| material | stainless steel |
TQC sheen SH1686 Mayer Rods Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
