BOZHEN MJX-250F Mold Incubator
Temperature range of BOZHEN MJX-250F Mold Incubator 4~ 60 ℃, Temperature Fluctuation +/- 0.5 ℃, Temperature resolution 0.1 ℃, good liner material stainless steel, liner size 520 × 460 × 1050mm, shelf (standard) 2 pieces, Timer Range 1~ 9999min. MJX-250F is a fluorine-free Mold Incubator.
BoZhen
MJX-250F
-
YIHENG BPH-9272 Precision thermostatic incubator Digital display artificial Incubator
$ 1311.00 -
SANFA SHP-400E Biochemical Incubator touch 400L
$ 2303.00 -
Kenton LRH-150SMJ Mold Incubator 150L
$ 1568.00 -
YIHENG LRH-1500F Biochemical Incubator
$ 8912.00 -
RONGHUA DNP-9272-1 electrothermal Thermostatic Incubator
$ 619.00
Introduction
The new fluorine-free design of the experimental equipment, the use of international brand compressors and circulating fans, large LCD screen, easy to operate, high efficiency and low energy consumption. Not only does it promote energy saving, but it also has a long service life, which minimizes noise and reduces cooling time by more than 40% compared to conventional cryogenic equipment.
Purpose concept
It is suitable for environmental protection, drug testing, agricultural and livestock, aquatic research, colleges, production departments, water analysis and BOD determination, bacteria, mold, microbial cultivation, preservation, plant cultivation, breeding experiments of special constant temperature equipment.
Features
1. The use of good mirror stainless steel liner, the box body is made of good steel plate spraying, the four corners of the semi-circular arc, easy to clean, the spacing of the partition in the box is adjustable.
2. Intelligent digital display thermostat, simple and easy to understand, easy to observe and operate.
3. Equipped with the international professional fuzzy PID intelligent temperature controller, small fluctuation, with timing function (0-9999min)
4. It is equipped with an independent temperature limit alarm system, which will be automatically interrupted when the limit temperature is exceeded, so as to ensure the safe operation of the experiment and no accidents. (Optional)
5. With 4~20mA standard current signal, RS485 interface can be connected to the Recorder and computer, and can record the change of temperature parameters. (Optional)
6. Mold Incubator ultraviolet sterilization system. Regular disinfection can effectively prevent contamination during cell culture.
Series selection
Mold Incubator (F-free type) | |||
Model | MJX-70(F) | MJX-150(F) | MJX-250(F) |
Temperature control range | 4~60℃ | ||
Temperature resolution | 0.1℃ | ||
Constant temperature fluctuation | ?0.5℃ | ||
Input power | 350W | 450W | 650W |
Operating ambient temperature | +4~35℃ | ||
Supply Voltage | 220V 50HZ | ||
Studio size (mm) | 400X350X500 | 500X370X800 | 520X460X1050 |
Cargo carrier (standard) | 2 pieces | ||
Timing range | 1~9999min | ||
BoZhen MJX-250F Mildew IncubatorSpecifications
| LIST | VALUE |
|---|---|
| Temperature range | 4~60℃ |
| Temperature Fluctuation | ±0.5℃ |
| Temperature Resolution | 0.1℃ |
| Liner material | Good stainless steel |
| Liner size | 520*460*1050mm |
| Shelf (standard) | 2pcs |
| Timer | 1~9999min |
| Power supply Voltage | 220V 50Hz |
| Input Power | 650W |
| Environmental temperature | 4~35℃ |
| Enclosure Material | Steel plate plastic spray |
BoZhen MJX-250F Mildew Incubator Packing list
Machine X1, Shelf X2, Operation Manual X1, Warranty Card X1, Certificate of Conformity X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
