TAISITE DZ53T Vacuum Oven 250 ℃/53L

Introduction

This vacuum Drying Oven adopts independent partition heating, touch screen multi-stage PID full temperature section, program temperature control, accurate and reliable temperature control, uniform and stable heating.

Benefits:

• This vacuum Drying Oven adopts independent partition heating, touch screen multi-stage PID full temperature range.

• Programmed temperature control, accurate and reliable temperature control, uniform and stable heating.

• Bulletproof tempered glass viewing window allows you to see objects in the studio at a glance and is able to rush inert gas inside.

• The door closure can be adjusted tightly, and the synthetic silicon door sealing ring is shaped as a whole to ensure that the vacuum level in the box is maintained.

• Storage, heating and drying can be carried out in an environment without oxygen or filled with inert gases without oxidation.

• The heating method is flexible and variable, and the single-layer or double-layer heating mode can be selected.

• The controller can choose two operation modes: fixed value or programmable.

• The heating rate can be set during the fixed value operation, and three modes can be selected: start timing, constant temperature timing, and shutdown timing.

• When the program runs, 30 segments of programs can be set, and each program corresponds to 40 steps.The corresponding numbered programs can be called according to different test requirements.

• The temperature, time and jump of each step can be flexibly set in each program.You can insert or delete a segment at will to facilitate program changes.

Detail design advantages

Figure 1Bulletproof tempered glass viewing window

Fig. 2, independent thickened partition: independent partition heating, detachable, easy to install

Figure 3,Temperature rise graph: time unit: minutes, temperature unit: °C

                                     Fig.1 Fig.2 Fig.3

Comparison of parameters of DZ vacuum Drying Oven series

complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.