MCW-3000A eddy current Coating Thickness Gauge paints, plastic, rubber

Introduction to the MCW-3000A Coating Thickness Gauge

The MCW-3000A eddy current coating Thickness Gauge uses the eddy current measurement principle, which can easily and non-destructively measure the thickness of non-conductive overlays on non-magnetic metal substrates (such as paints, rubber, plastics, oxide films, etc. on metals such as copper, aluminum, zinc, tin, etc.).

MCW-3000A Eddy Current Coating Thickness GaugeThe unique automatic deviation tracking technology makes the measured value more accurate, the probe is processed according to German process standards, and the new alloy material is used to greatly improve the service life and accuracy of the probe.

Key features

● Basic measurement mode: normal mode, minimum mode, statistical mode

● Monitoring and measurement mode: the difference can be set, and the upper and lower limit alarms can be set

● You can choose to delete and store a single piece of data, a group of data, or all of the data

● Zero-point calibration, two-point calibration and system calibration can be performed

● The shutdown mode can be set, the backlight can be turned on or off, and the factory state can be restored

● You can print stored values and statistical values

● A total of 6 groups of data are stored in groups, and each group stores 99 measurement points

● Stored measurements can be viewed in groups

Pictures

host x1, probe x1, coupling agent x1, battery x2, instruction manual x1, warranty card x1, certificate x1, suitcase x1.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.