PUYUN PY-H603D gluing fixture corrugated fibreboard adhesive strength test fixture
Separation unit length corrugated fibreboard gluing line required fixture, pin diameter φ 3mm (A/C corrugated) and φ 2mm (B corrugated), suitable for different corrugated type test, in line with national standards.
PuYun
PY-H603D
-
CHINA NBC-8504C Annular Pressure Sampler
$ 370.00 -
JINGWEN JW104 paper circular quantitative Sampler gravimeter
$ 522.00 -
HORIZON DL-100 Sampler paper foil, stamped sampling
$ 432.00 -
CHINA NBC-5684B paper Round Quantitative Sampler 125cm ²
$ 441.00 -
YINUO YN-TDY02 stiffness Sampler stiffness 38 * 70mm crease stiffness 36 * 38mm
$ 640.00
Introduction
PY-H603D bonding fixture is the fixture required to separate the bonding line of unit length corrugated cardboard under the specified test conditions. It is used to measure the adhesive strength after pasting on both sides of corrugated cardboard. It meets the GB6548-2011 standard. This product is divided into Two sets, E corrugated for small cartons, A/B/C corrugated for small and medium cartons, all pins are straight and should not be bent.
PuYun PY-H603D Gluing fixtureSpecifications
| LIST | VALUE |
|---|---|
| Suitable for corrugated type | A / B / |
| Pin diameter | Φ3mm(A/C楞)、Φ2mm(B楞) |
| Dimensions | 100*50*45mm |
| Number of fixtures | One master disk, four subdisks (A/B/C1/C2) |
| Weight | 2kg |
PuYun PY-H603D Gluing fixture Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
