SETCAS KW-4L-I automatic glue dispenser, high-end
Maximum support 8 inches, touch screen with program control, polytetrafluoroethylene (PTFE) cavity, integrated automatic glue function, maximum speed 12000rpm, with external foot switch
Setcas
KW-4L-I
-
SETCAS KW-4S Heated homogenizer for glove box
Login -
SETCAS KW-4Q experimental homogenizer, supports 12-inch substrates
Login -
CHINA 12Az laboratory Spin Coater, four-stage speed, LCD screen
$ 1097.00 -
Chengyue CY-SPC8-A Spinning Coater acrylic cavity 10000 rpm, touch screen
$ 2403.00 -
HuiNuo NBC-12TV2 (150 ℃) heating uniform Spinning Coating Machine, high temperature Spinning coater
$ 5667.00
feature of product
With automatic dispensing function, peripheral foot switch;
PTFE polymer chamber material, acid and alkali resistance, corrosion resistance, with a curved chamber bottom to facilitate glue export;
It has the function of exhaust gas pumping and exhausting in the chamber;
It can be heated and baked by gas, the temperature range: 0-200℃, the heating and cooling speed is 100℃/S; the direction of forward and reverse spin coating can be switched freely;
Real-time display of speed rise curve;
It has the functions of motor glue feeding alarm and protection;
It has alarm and interlock functions for insufficient substrate adsorption force.
Product Structure
Function introduction of KW-4L-I front left view angle
Function introduction of KW-4L-I rear right view angle
KW series homogenizer model comparison
Setcas KW-4L-I Glue levelerSpecifications
| LIST | VALUE |
|---|---|
| Suitable substrate | 5~200mm |
| Speed range | 1~12000rpm |
| Speed Accuracy | 1rpm |
| Speed stability | ±0.1% |
| Acceleration range | 1~10000rpm/s |
| glue uniformity | ±1% |
| Control signal | indicator |
| Human Machine Interface | 8 inch touch screen |
| Communication interface | USB (std.)/RS485 (std.) |
| stylus | BAMBOO Resistance Pen (std.) |
| Vacuumpump | AP-550V No oil pump |
| Set data | Unlimited sets of data, 15 revolutions per set (std.) |
| Every time | 0~10000s |
| Store data | Unlimited set of data |
| Data Protection | Default with power-down protection function |
| Swirl/spin direction | Can be reversed |
| AC Power port of glue leveler | AC100-250V |
| Vacuumpump Power interface | AC220V (std.) |
| Gluer power | 650W |
| Vacuumpump power | 350W |
| Vacuumpump pumping rate | ≥60L/min |
| Volume of homogenizer | 340*500*250mm |
| Gluer Weight | 18KG |
| Pump Weight | 9KG |
| Environment temperature | 0~40℃ |
| Relative Humidity | <85% |
Setcas KW-4L-I Glue leveler Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Detailed operation steps schematic diagram of the glue leveler
- What is spin coating?
- Spin coatings spin coaters: principles, applications, functions and maintenance
- What is spin coating and how does it work?
- Three small suggestions for improving the effect of spin coating
- Two different spin coating methods: dynamic dispensing and static dispensing
- What are the common problems of spin coating experiment?
- Spin-on cleaning and specific cleaning steps
- What are the special requirements for spin-coated nanoparticles?
- Common defects in spin coating of homogenizer