SETCAS setcas KW-4E-II program-controlled Spin Coater, automatic glue drop + remote control

Maximum support 8 inches, touch screen with program control, PTFE cavity, with heating temperature control function, remote control function and automatic glue function, maximum Rotation speed 12000rpm.

Brand

SKU: NB038462

Setcas

Model

Price

Please contact customer service

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

Setcas shopSE

Information

Datasheet RFQ Contract Catalog Manual

What else did others buy

Genuinegoods

Setcas KW-4E-II Glue levelerOverview
Specifications
Comments
FAQs

KW-4E-II

Glue leveler

Side Case KW-4E-II Coating Machine Details Figure 1

Advantages

PTFE polymer chamber material, acid and alkali resistance, corrosion resistance, with a curved chamber bottom to facilitate glue export;
It has the function of exhaust gas pumping and exhausting in the chamber;
Gas heating and drying, temperature range: 0-200°C, heating and cooling speed 100°C/S; forward and reverse spin coating directions can be switched freely;
Real-time display of speed rise curve;
It has the functions of motor glue feeding alarm and protection;
It has alarm and interlock functions for insufficient substrate adsorption force ;
The recipe has a power-down protection function.

Product Structure

Side Case KW-4E-II Coating Machine Details Figure 2

KW-4E-II Front Left View Function Introduction

Side Case KW-4E-II Coating Machine Details Figure 3

Function introduction of KW-4E-II rear right view angle

KW series homogenizer model comparison

Side Case KW-4E-II Coating Machine Details Figure 4

Setcas KW-4E-II Glue levelerSpecifications

LIST	VALUE
Suitable substrate	5~200mm
Speed range	1~12000rpm
Speed Accuracy	1rpm
Rotation speed stability	±0.1%
Acceleration range	1~10000rpm/s
Swirl/spin direction	Positive and reverse switching
glue uniformity	±1%
Heating range	RT+~200℃
Heating rate (chamber air temperature)	To 100 ℃ (1S), to 200 ℃ (2S)
Chill down	To room temperature (2S)
Human Machine Interface	8 inch touch screen
Communication interface	USB (std.)
stylus	BAMBOO Resistance Pen (std.)
Vacuum pump	SC-550V oil-free pump
setup data	Unlimited sets of data, each set of 15 Rotation speed (std.)
Programming every time	0~10000s
store data	Unlimited set of data
Data Protection	Default with power failure protection function
AC Power port of glue leveler	AC100-250V
Vacuum pump Power interface	AC220V (std.)
Power of glue leveler	650W
Vacuum Pump Power	350W
Pumping Speed	≥60L/min
Volume of homogenizer	340500250mm
Gluer Weight	18KG
Pump Weight	9KG
Environmental temperature	0~40℃
Relative Humidity	<85%

Setcas KW-4E-II Glue leveler Packing list

whole machine X1, vacuum oil-free pump x1, sheet, tray x3, power cord x1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Is the substrate PET trial? Sheet, a few centimeters to twenty centimeters

[A]

Horizontal is OK.

[Q]

This spin coating is then heated, which is heating while spinning coating

[A]

Because ours is controlled by the screen with a program, it can adjust the heating function to a minimum or turn it off. You can spin the coating first and then heat it, or you can spin the coating while heating. There is no problem in both ways.

[Q]

This spin coating is then heated, which is heating while spinning coating

[A]

Both can be supported.

[Q]

Is there any requirement for the outer diameter of the substrate of the homogenizer?

[A]

The outer diameter of the substrate should be larger than the outer diameter of the chip holder boss by 2 to 4 mm.

[Q]

How often should the air extraction chamber of the glue leveler be cleaned?

[A]

There are three situations: normal use for three months; Rotation speed of the motor is unstable or stuck; glue is sucked into the exhaust chamber, to be cleaned immediately.

1 2 Next Last

+Setcas KW-4E-II Glue leveler Big data

+Setcas KW-4E-II Glue levelerKnowledge

+Setcas KW-4E-II Glue levelerStandard

ActiveSJ 21315-2018

+Navigation