CHINA Experimental Metering rod ASP230μm film thickness Grooved Rods Coating Applicator
230μm film thickness, 300mm application width, formed process, groove is not blocked, easy to clean, stainless steel material.
Aosipai
ASP230-L400
-
RDS #95 Mayer Rods WFT 217.2μm Length 400mm
$ 155.00 -
Japan OSP-60/60 Coating bar WFT 60μm length 60mm
$ 115.00 -
Japan OSP OSP-230T L400 formed coating rod stainless steel extrusion rod 230μm
$ 172.00 -
RDS 12 #1/2 "Molded Mailer Rod, Manual Spreader Rod WFT 27.4 μm
$ 179.00 -
Japan OSP-120/400 inks bar WFT 120μm length 400mm
$ 172.00
ASP wire rod coater is a domestic (CN) high-end coater, using extrusion technology, wear-resistant stainless steel material, easy to clean and good corrosion resistance. The Total length of the rod is 400mm, the effective coating width is 300mm, and the grips at both ends are 5cm each. There is no need for a matching handle, and it can be directly held and scraped.
This series of wire rod applicators provide film thickness rods ranging from 180 to 600 microns, which are suitable for the experimental needs of coatings, inks, glues, resins, new materials, etc. that need to prepare thicker films.
Wire Bar Coater Dimensional Drawing
Models List of ASP Wire Bar Coater
| model | wet film thickness | Effective coating width | Coating process |
| ASP180-L400 | 180μm | 300mm | Squeeze |
| ASP200-L400 | 200μm | ||
| ASP230-L400 | 230μm | ||
| ASP250-L400 | 250μm | ||
| ASP275-L400 | 275μm | ||
| ASP300-L400 | 300μm | ||
| ASP330-L400 | 330μm | ||
| ASP350-L400 | 350μm | ||
| ASP400-L400 | 400μm | ||
| ASP450-L400 | 450μm | ||
| ASP500-L400 | 500μm | ||
| ASP550-L400 | 550μm | ||
| ASP600-L400 | 600μm |
Aosipai ASP230-L400 Mayer RodsSpecifications
| LIST | VALUE |
|---|---|
| Production process | Formed |
| WFT | 230µm |
| diameter | 10mm |
| Total length | 400mm |
| Application width | 300mm |
| Grip width | 50mm |
| material | Stainless steel material |
Aosipai ASP230-L400 Mayer Rods Packing list
Bar X1, Transparent Encasement Hose X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
