RDS 95G #3/8 "Pressure sensitive adhesive Spreader rod, gap Applicator rod film thickness 217.2μm
Interstitial wire-wound, film thickness 217.2 μm, diameter 9.52 mm, suitable for high viscosity fluid scraping.
RDS
95G# 3/8"
-
Japan OSP-150/400 thread rod WFT 150μm length 400mm
$ 173.00 -
RK K303.10.6 No. 6 Coater wire rod K303 Coater special film thickness 60μm
$ 193.00 -
Japan OSP OSP-100T L60 Applicator rod wire-wound drawdown Bar WFT 100μm length 60mm
$ 116.00 -
Coating Proofing rod 40μm Printing Proofing rod Stainless steel Coloring Applicator rod
$ 96.00 -
Japan OSP-52/400 painting coating bar WFT 52μm length 400mm
$ 173.00
Preparation principle
Following the Mayer Rod film coating principle, for higher viscosity fluids, the gap film coating rod reduces clogging and eliminates scratches. By winding smaller wires at pitches (see photo), the cavity created is wide and shallow, allowing thick coatings to flow better. Smaller wires create smaller interruptions in the coating flow, allowing for more complete wetting of the coating.
RDS 95G# 3/8" Applicator rod 3/8 "Specifications
| LIST | VALUE |
|---|---|
| Production process | Interstitial wire-wound |
| WFT | 217.2µm |
| diameter | 9.52mm |
| Total length | 400mm |
| Application width | 300mm |
| material | stainless steel |
RDS 95G# 3/8" Applicator rod 3/8 " Packing list
Stainless Steel Rod X1 Transparent Encasement Hose X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Bar Spreader Technology: Principles, Applications and Advantages over Miscellaneous coating methods
- The overlooked role of Mayer Rods in laboratory wet-film preparation