KAIRDA NDT680 digital Ultrasonic Flaw Detector nondestructive detection 500 sets of configuration channels
The 400MHz CPU is used to realize intelligent analysis, and 500 sets of configuration channels meet diverse detection requirements. The high-sensitivity probe can detect extremely small defects, and supports USB2.0 high-speed data transmission.
KairDa
NDT680
-
LEEB leeb522 Ultrasonic Flaw Detector, digital Flaw Detector
$ 3172.00 -
LEEB leeb500 Ultrasonic Flaw Detector Scanning range 0~6000mm Automatic calibration probe
$ 1138.00 -
KAIRDA NDT680 digital Ultrasonic Flaw Detector nondestructive detection 500 sets of configuration channels
$ 1290.00 -
LEEB leeb510 Ultrasonic Flaw Detector, suitable for small diameter, thin-walled tube flaw detection
$ 1763.00 -
LEEB leeb610C Magnetic Particle Flaw Detector for three different probes
$ 554.00
KairDa NDT680 Digital Ultrasonic Flaw DetectorSpecifications
| LIST | VALUE |
|---|---|
| detection range | (0~15000)mm |
| Frequency | (0.2~20)MHz |
| Speed of sound | (100~20000)m/s |
| Frequency of sexual repeability | (20~2000)Hz |
| Dynamic range | ≥36dB |
| Vertical Linearity | ≤1.5% |
| Horizontal Linearity | ≤0.1% |
| resolution | >42dB(5P14) |
| digital suppression | (0~80) %, does not affect linearity and gain |
| electrical noise level | ≤10% |
| Probe type | Straight probe, oblique probe, dual crystal probe, penetration probe |
| gate | Inlet gate, loss gate; single gate reading, double gate reading, peak trigger, edge trigger |
| Gate alarm | Beep alarm, LED light alarm |
| Power Supply | Direct current (DC) 9V; lithium battery works continuously for more than 12 hours |
| exterior size | 263×170×61mm |
| Host Weight | 1.92kg |
| Environmental temperature | (-10~50)℃ |
| Relative Humidity | (20~95)%RH |
KairDa NDT680 Digital Ultrasonic Flaw Detector Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
