CHINA friction coefficient Tester NBC-MCX

Applications

It is suitable for measuring the static friction coefficient of plastic films and sheets, rubber, paper, cardboard, woven bags, fabric styles, metal material composite belts for communication cables and optical cables, conveyor belts, wood, coatings, wipers, shoe materials, tires, etc. and coefficient of kinetic friction. By measuring the slipperiness of the material. It can also be used to measure the slipperiness of daily chemical products such as cosmetics and eye drops.

Principle

Clamp the strip-shaped test sample with a sample clamp, and wrap the slider with the sample to be tested, then place the slider on the hanging hole of the sensor, and under a certain contact pressure, drive the rack through the motor to move the sensor. That is to make the two test surfaces move relative to each other. The force signal measured by the sensor is amplified by the integrator and sent to the Recorder, and the coefficient of dynamic friction and the coefficient of static friction are recorded respectively.

Standards

The friction coefficient Tester is mainly based on the following standards: "ASTMD1894", "ISO8295", "TAPPI816", "GB/T10006 Method for Determination of Friction Coefficient of Plastic Film and Sheet".

complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.