TSINGTAO TOKY MS7100TS Wood Moisture Analyzer 3~ 80%

Introduction

MS7100TS veneer Moisture Meter is mainly used to measure all kinds of veneer (or veneer), veneer, veneer and other sheet-type wood products. It is suitable for furniture manufacturing, floor manufacturing, musical instrument manufacturing, architectural decoration, automobile and aircraft interior decoration, handicrafts and other industries. The instrument uses a needle-free sensor design to measure data without destroying the veneer. It has high measurement accuracy and stable performance. It is a suitable choice for testing the moisture content of related products.

Features

• Through the temperature and humidity compensation technology, the measurement accuracy is high and the stability is good.

• The measurement speed is fast, which can replace the traditional oven method, shorten the moisture determination time, the whole process operation is less than 1 minute, and the measured value is displayed immediately, which greatly saves the precious time of the testing personnel.

• Small size, light weight, strong anti-interference performance, can be carried on-site for rapid detection.

• Backlit liquid crystal display technology, clear display, low power consumption.

• Alarm function, the function of holding the maximum value of the measured value.

• Automatic shutdown power saving function.

• RS232/RS485/USB/Bluetooth data transmission can be customized.

• 4~20mA output can be customized.

The whole machine X1, operation manual, certificate of conformity, warranty card

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.