Netherlands TQC VF1847 Cross Hatch Cutter Set CC1000 Series Cross Hatch Cutter

Introduction

TQC CC1000 series multi-element cross-cutters include five models: VF1839, VF1842, VF1844, VF1846, and VF1847, corresponding to different coating film thicknesses. The CC1000 series scratcher has an automatically adjustable blade holder, which ensures a balanced pressure on the blade. This round cutter has eight cuts.

Product acessories

The tool box for the TQC CC1000 series multi-element grating Tester contains: a soft and easy-to-grip handle, a hard cutting blade (the blade is replaceable, see above), a nylon brush, an illuminated magnifying glass, and tape.

Real photos of CC1000 scratcher

Principle

TQC CC1000 series multi-element cross-hatch device uses the Principle of the cross-hatch method. The cross-hatch method is a test method for measuring the adhesion of dry coating on the surface. It uses a row of 6/11 blades between two outer conductors. Mark out 25/100 squares and determine the evaluation level through comparison. Measures the adhesion of a dry coat of paint to a substrate through a series of cuts. Cut out two parallel lines that cross at right angles to get 25 or 100 squares. Assess the area where the parallel lines intersect on a table and treat it briefly with a stiff brush or with tape on a hard substrate.

Comparison table of full range of adhesion Tester models

Take you into the Dutch TQC

Cross Hatch Cutter x1, 3M Tape x1, Brush x1, magnifying glass x1, Encasement box x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.