Lugong STD5000H Single Arm Tensile Tester Single column tensile machine 5000N

Introduction

It is suitable for measuring the mechanical properties and related physical parameters of various materials in tensile, compression, bending, shearing, tearing, peeling, puncture and other states. It can be used for tensile, compression, three-point bending resistance, four-point bending resistance, shearing, tearing, peeling, puncture of finished shoes, carton pressure, foam cycle compression, spring tension and compression and various dynamic and static cycle tests. And can be tested and provided according to GB, ISO, DIN, ASTM, JIS and other domestic and international relevant standards.

Performance characteristics:

Mechanical process structure

The main frame is mainly composed of a base, a column and a precision ball screw to form a floor-mounted structure; The transmission loading system adopts servo motor, planetary reducer and synchronous toothed belt deceleration device to drive the high-precision ball screw to rotate, and then drive the moving beam to achieve loading. This machine has beautiful shape, good stability, large rigidity, high control accuracy, high work efficiency, low noise, energy saving and environmental protection.

Control and measurement systems

1. Hierarchical management mode of user rights

2. It has a powerful test management function

3. Powerful data and curve analysis function

4. Convenience of report editing

5. The test unit can be set arbitrarily according to the needs

6. Multiple protection mechanisms

7. Test data reminder storage to avoid test data loss caused by accidents

8. One-click switching of multiple Chinese languages

9. Using USB or serial port communication, the data transmission is stable and reliable, and the anti-interference ability is strong

Host X1, Power Cord X1, Manual X1, Fixture X1, Hand Control Box X1, Software Installation Card X1, Force Value Sensors X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.