Factory Direct Rgdc-01/500 immersion coil coater (with drying) effective width 500mm
Spreader process unwinding → soaking → double roll extrusion residue → drying → film laminating → winding, Coating size ≤ 500mm, guide roll width 500mm, drying tunnel temperature adjustable at room temperature~ 100 ℃, extrusion unit extrusion method → double roll extrusion, Coating speed adjustable from 0~20m/min
Factory
Rgdc-01/500
-
Taigang TG-RR300 laboratory roll-to-roll small coater small hot-melt adhesive coater
$ 5978.00 -
CHINA Rjy-01/200dc Immersion Crystallization coater Continuous Film Applicator
$ 46708.00 -
Drawdown blade coater Continuous Experimental Film Applicator 60cm Unwinding + Scratching + Drying + Winding
$ 31162.00 -
Air-cooled curing coil Film Applicator Rgd-01/300cl Tape unwinding + scraping + air-cooled curing + overlay deviation correction + winding function
$ 34271.00 -
CHINA NBC-6025FB pilot production hot-melt adhesive coater film aluminum foil film equipment
Login
Introduction
RGDC-01/500 immersion coil coating machine (with drying) is a factory direct product, with an effective width of 500mm, specially designed for plastic film, paper, non-woven fabrics and other coils, which can be used for dipping water-based coatings, solvent-based coatings, UV coatings, etc., and simultaneously complete the drying process, which is suitable for the coating needs of a variety of industrial production scenarios.
Features
Efficient process - "unwinding→immersion→ double-roller extrusion of residual material→ drying→ lamination →winding" process, dipping and drying integration, consistent and efficient production.
Precise control - the drying channel temperature can be adjusted at room temperature -100°C, the coating rate is controllable from 0 to 20m/min, the double roller extrusion gap is 1 - 10mm, the handwheel is adjusted with the dial gauge display, the tension and deviation correction are automatically controlled, and the deviation correction accuracy is ±1mm.
Widely applicable - support a variety of coils and coating fluids, the immersion bath is made of corrosion-resistant stainless steel, suitable for different solution characteristics.
Stable and reliable - scientific structural design, reasonable rewinding and unwinding diameter and load-bearing, air source and power supply to meet conventional needs, to ensure the stable operation of the equipment.
Factory Rgdc-01/500 Soaking coil coater (with drying)Specifications
| LIST | VALUE |
|---|---|
| Spreader process | Unwinding → soaking → double roll extrusion residue → drying → film laminating → winding |
| Coating method | dip coating |
| Coating size | ≤500mm |
| Width of guide roller | 500mm |
| Bath size | 500Mm Width * 500mm Length * 500mm Height mm |
| Drying tunnel size | 500Mm width * 1000mm length * 500mm height mm |
| Drying tunnel temperature | Room temperature~ 100 ℃ adjustable |
| Extrusion unit | Extrusion method → double roll extrusion |
| Squeeze adjustment display | Handwheel adjustment, dial indicator display |
| Squeeze adjustment gap | 1-10mm |
| Coating speed | 0~20M/min adjustable |
| winding diameter | 3-Inch expansion shaft, load-bearing 50KG |
| tension control | Max.60N |
| unwinding diameter | Max. Ф200mm |
| winding diameter | Max. Ф200mm |
| Tension Control mode | automatic |
| Control mode | automatic |
| Correction Accuracy | ±1mm |
| Dip coating type | Solution soaking (Note: After the substrate is crystallized in solution, it can be rolled around the tape) |
| Dip coating material | Resistant corrosion stainless steel (note, the solution cannot react chemically with the material) |
| Number of baths | 1 |
| Applicable coil type | Plastic film, paper, non-woven fabric, etc |
| Spreader type | Water-based paints, solar-based paints, UV coatings, etc |
| Dimension | 4000Mm * 600mm * 1600mm (subject to actual customization) |
| Weight | 0.5T (subject to actual customization) |
| Power Supply | Single Phase AC220V +/- 10%, Frequency 50Hz, Power 9.5KW |
| gas source | 0.5~ 0.8MPa compressed air |
Factory Rgdc-01/500 Soaking coil coater (with drying) Packing list
Whole machine x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.