Factory Direct NBC-LC-100L thermal shock Test Chamber -40 ℃~ + 150 ℃
Test temperature impact range -40 ° C~ + 150 ° C (optional programming setting), temperature conversion time 10 seconds (time can be specified), controller control accuracy ± 0.2 ° C, box uniformity ± 2, volume L100L, shell material sheet metal paint
Factory
NBC-LC-100L
-
Aipei 2AP-CJ-80A Two-Chamber Thermal Shock Test Chamber Air-Cooled -40 ℃
$ 16223.00 -
Aipei 2AP-CJ-80B Two-Chamber Thermal Shock Test Chamber Air-Cooled -55 ℃
$ 17326.00 -
KESIONOTS Three Box Thermal Shock Test Chamber KS-OTS-LR150LA Low Temperature -45 ℃/150L
$ 19954.00 -
China domestic (CN) NBC-150E Thermal Shock Test Chamber High and Low Temperature Impact Tester
$ 14015.00 -
KESIONOTS Electronic High and Low Temperature Impact Tester KS-OTS-LR50LB Low Temperature -55 ℃/50L
$ 10533.00
Product Introduction
This series of procedures High-low temperature cold and hot shock Test Chamber is mainly used to test the resistance of materials to extremely high or low temperatures, which is similar to the situation of discontinuous high or low temperatures, and the hot and cold shock test can make various items complete the test in the shortest time. The changes or physical damage caused by thermal expansion and contraction or other physical values are caused by changes in thermal expansion and contraction or other physical values, and all kinds of products can be completely trusted by using PID systems. The effect of thermal shock includes electrochemical changes caused by cracking or breaking of the finished product and displacement, etc., and the PID system will automatically control all digits, which will make your operation easy.
The hot and cold shock Tester is an essential testing equipment for metal, plastic, rubber, electronics and other material industries, used to test the structure of materials or composite materials, which can be tolerated in a continuous environment of extremely high temperature and extremely low temperature in an instant, and can detect the chemical changes or physical damage caused by thermal expansion and contraction of the test sample in the shortest time. The product meets the requirements of GB/T2423.1-2008 test A, GB/T2423.2-2008 test B, GB-T10592-2008, GJB150.3-198, GJB360A-96 method 107 temperature shock test.
Satisfied test method: GJB150.5-86 temperature shock test, in line with MIL, IEC, JIS specifications.
Product Use:
Hot and cold shock Test Chambers are widely used in electronic and electrical components, automation parts, communication components, auto parts, metals, chemical materials, plastics and other industries, national defense industry, aerospace, military industry, BGA, PCB base trigger, electronic chip IC, semiconductor ceramics and polymer materials of physical changes, test the repeated tensile resistance of its materials to high-low temperatures and the chemical changes or physical damage of products produced by thermal expansion and contraction, can confirm the quality of products, from precision ICs to heavy mechanical components, It can be used as a basis or reference for its product improvement.
Meet the standards
1. GB-2423.1-89 (IEC68-2-1) Test A: Low temperature test method.
2. GB-2423.2-89 (IEC68-2-2) Test B: High temperature test method.
3. GJB360.8-87 (MIL-STD-202F) high temperature life test.
4. GBJ150.3 (MIL-STD-810D) high temperature test method.
5. GJB150.4 (MIL-STD-810D) low-temperature test method.
6. National military standard GJB150.3-86;
7. National military standard GJB150.4-86;
8. National military standard GJB150.5-86;
Factory NBC-LC-100L Hot and cold shock Test ChamberSpecifications
| LIST | VALUE |
|---|---|
| Test temperature impact range | -40 ℃~ + 150 ℃ (optional programming setting) |
| High temperature box temperature range | + 60 ℃~ + 180 ℃ (optional programming setting) |
| Cryogenic box temperature range | 0 ℃~ -55 ℃ (programmable arbitrary setting) test temperature range -40---150 degrees |
| Temperature transition time | 10 seconds (time can be specified) |
| Controller control Accuracy | ±0.2℃ |
| box uniformity | ±2 |
| Volume L | 100L |
| shell material | Sheet metal paint |
| Inner box material | SUS #304 Thickened heat-resistant and cold-resistant stainless steel plate, first-class light panel |
| Thermal Insulation | High-density glass wool and high-strength PU foam insulation materials have good thermal insulation effect |
| Box structure | This equipment is divided into: high temperature zone, low temperature zone |
| Air supply circulation system | Japanese multi-wing centrifugal Circulating Fan, Japanese motor whole group |
| heater | U-shaped fin type 304 #seamless steel high-speed heating electric heater. |
| Refrigeration compressor | Adopt imported Compressor unit |
| Refrigeration accessories | Table bend center force evaporator, Mar fan, etc |
| Refrigeration method | Adopt air-cooled or water-cooled heat dissipation (water towers, pipes, the buyer installs them by himself) |
| Sample holder | Hanging Basket |
| Test area size | 500 * 500 * 400 (width * depth * height) * 2 |
| Exterior size approx. | Width 1270x Depth 2020x Height 1820mm |
| Electrical accessories | Domestic well-known brand electrical components |
| Temperature and humidity control instrument | Programmable platform Controller, touch screen input, Chinese and English switching. Different temperature points can be arbitrarily set according to customer requirements |
| wiring method | The company's electronic control wiring method is implemented in accordance with international electrical standards |
| Protection device | Compressor overheating, overtemperature, overload, high pressure, low pressure, oil pressure, overcurrent, under-phase, power failure standby and other alarm warnings. |
| Power Supply | AC380V 50~60Hz 18KW |
| Meet the standard | GB2423 [1] .02 High temperature test method, GB2423 [1] .01 Low temperature test method. |
Factory NBC-LC-100L Hot and cold shock Test Chamber Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.