TQC VF2015 stainless steel Din cup, filter diameter 4mm

Introduction to VF2015 Stainless Steel Din Cup

TQC VF2015 stainless steel Din cup is a DIN Viscosity Cup made of stainless steel with a filter tip diameter of 4mm and conforms to the international standard Din53211. VF2015 stainless steel Din cup is suitable for coating, paint, ink and other industries. Each stainless steel DIN cup has a corresponding serial number.

TQC Stainless Steel Din Cups are produced according to a number of international standards that have been developed over the years and stipulate not only the precise dimensional tolerances required in the process, but also their use and recording of the data obtained. The DIN cup was originally designed for rapid viscosity and consistency evaluation of products that comply with Newtonian mechanics or are close to Newtonian mechanical properties (such as paints, paints, inks, and pigments).

Viscosity cup principle

Viscosity cups are used to test the concentration of coatings, paints and other similar products. The viscosity of a liquid is calculated and classified by the process in which the liquid flows out of the hole under the Viscosity Cup. This method of measuring kinematic viscosity generally uses minutes to calculate the flow time, and then uses a disk viscosity calculator to convert it into a dynamic viscosity unit, so the Viscosity Cup is also called an outFlow Cup.

DIN cup brand introduction

TQC brand DIN cups are produced under strict quality control procedures and are engraved with a unique serial number. Most Viscosity Cups are made of aluminum titanium alloy and stainless steel.

Actual pictures

Instructions for use

It is recommended to purchase at least 1 standard Viscosity Cup with a calibration certificate to ensure accurate measurement results. When measuring, compare the results of measuring the product standard product sample with the measuring Viscosity Cup and the standard Viscosity Cup, and draw a correction chart, so that the outflow time can be corrected through the chart to obtain the correct test results.

TQC model selection table

Take you into the Dutch TQC

Viscosity cup x1, Encasement box x1, Manual x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.