PUSHEN HGQ 1mm Single Blade Cross Hatch Cutter Standard 2 1mm Single Blade Cross-cut Testers

1Mm tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ASTM/D3359 standards.

Brand

SKU: NB005480

Pushen

Model

HGQ 1mm

Price

$ 179.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

Pushen shopSE

Information

Datasheet RFQ Contract Video Catalog Manual

What else did others buy

TQC SP3020 adhesion tape 3M adhesion 7.6 N/cm

$ 162.00
TQC SP1705 cross-cut cutter head 11 teeth, spacing 1mm Suitable for CC2000/CC3000 series

$ 363.00
TRUIT TR 5006/1.5 adhesion cross-cut plate cross-cut number 11

$ 145.00
Shanghai PUSHEN 3mm * 6 Tooth Cross Hatch Cutter

$ 148.00
TRUIT TR 5001/3 Single top coat Cross Hatch Cutter 1.5mm/11 teeth

$ 145.00

Genuinegoods

Pushen HGQ 1mm Single Blade Cross Hatch CutterOverview
Specifications
Comments
FAQs

HGQ 1mm

Single Blade Cross Hatch Cutter

1Mm tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ASTM/D3359 standards.

Introduction

Pushen HGQ 1mm single-edged paint film scratcher is a cross paint film scratcher with 11 teeth and 1mm spacing between the teeth. The paint scratcher comes standard with two 1mm single-edged blades.

Standards

Comply with GB/T 9286 Paints and varnishes, scratch test of paint film, ISO 2409, ASTM D 3359 standards.

application principle

The paint film scratcher, also known as the hundred grid knife, is used to evenly draw a square of a certain size, and evaluate the adhesion of the coating film to the substrate by evaluating the integrity of the coating film in the square.

Paint film scratcher application

It is mainly used for the determination of the cross-hatch adhesion of coatings, not only for laboratories, but also for construction sites under various conditions.

Pushen HGQ 1mm Single Blade Cross Hatch CutterSpecifications

LIST	VALUE
Number of teeth	11 teeth
Tooth spacing	1mm
Handle material	hardwood
application standard	GB/T 9286、ASTM D 3359

Pushen HGQ 1mm Single Blade Cross Hatch Cutter Packing list

Cross Hatch Cutter x1, 3M tape x1, brush x1, magnifying glass x1, Encasement box x1, 1mm cutter head x2

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Can this tooth pitch be selected 1mm separately? Can this cutter head be replaced?

[A]

Hello, the cutter head of the scratcher can be replaced at any time. Pushen comes standard with two 1mm cutter heads.

[Q]

Determination of water-based interior-wall Coating adhesion, is this cross-cutting knife suitable?

[A]

This model is suitable for the determination of water-based inner and outer wall Coating adhesion in architectural coatings. The cross-cut test is mainly carried out with knives, and the firmness of the Coating to the substrate is judged according to the number of squares of the film peeling. Use a sharp blade and a scale steel ruler to cut 11 cuts with a distance of 1mm in the vertical and horizontal directions of the test plate, and the vertical and horizontal cuts intersect into 100 squares. So it is applicable.

[Q]

Are all Single Edge Cross Hatch Cutters available for inspection in the ISO 2409 standard?

[A]

Not necessarily, but this HGQ 1mm Single Blade Cross Hatch Cutter can be considered.

[Q]

How many knife heads does this HGQ Cross-Cut Tester come standard with?

[A]

Hello, two 1mm ones.

+Pushen HGQ 1mm Single Blade Cross Hatch Cutter Big data

+Pushen HGQ 1mm Single Blade Cross Hatch CutterSimilar products

+Pushen HGQ 1mm Single Blade Cross Hatch CutterKnowledge

+Pushen HGQ 1mm Single Blade Cross Hatch CutterStandard

+Navigation