Type A Fillet Weld Probe KCT-IIIA, KCT-IIIC Magnetic Particle Flaw Detector
Type A fillet weld probe can be used for local flaw detection of various fillet welds and the inner and outer corners of large workpieces. It is an optional probe for KCT-IIIA and KCT-IIIC Magnetic Particle Flaw Detector.
KODIN
-
KAIRDA NDT681 digital Ultrasonic Flaw Detector PDF report 640 * 480 resolution
$ 1090.00 -
RUNJIE CDX-3 Magnetic Particle Flaw Detector Portable nondestructive testing instrument
$ 635.00 -
LEEB leeb610 Magnetic Particle Flaw Detector Magnetization Pole Distance 0~220mm
$ 387.00 -
KAIRDA NDT650 Ultrasonic Flaw Detector high gain 130dB intelligent calibrating
$ 1553.00 -
WENTAI HY-350 digital Ultrasonic Flaw Detector
$ 3940.00
Introduction
Kedian A-type fillet weld probe, also known as horseshoe probe, can carry out local flaw detection on the inner and outer corners of various fillet welds and large workpieces. The Type A fillet weld probe is an optional probe for KCT-IIIA and KCT-IIIC magnetic particle flaw Detectors.
Parameters
Probe pole distance: 0-160mm adjustable
Lifting force: more than 5kg
Probe working Voltage: AC36V
Probe Operating Current: about 8-12A
KODIN A-type fillet weld probe Flaw DetectorSpecifications
| LIST | VALUE |
|---|---|
| Scanning range | 0~160mm |
| lifting force | More than 5kg |
| Operating Voltage of probe | AC36V |
| Operating current of probe | About 8-12A |
KODIN A-type fillet weld probe Flaw Detector Packing list
Probe x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.