KCT-IIIA, KCT-IIIC Magnetic Particle Flaw Detector
The D-type magnetic yoke probe is equipped with a living joint, which can detect flaws in flat and curved workpieces. It is an optional probe for KCT-IIIA and KCT-IIIC Magnetic Particle Flaw Detector.
KODIN
-
WENTAI FET-99S Intelligent digital eddy current Flaw Detector with installation training
$ 7066.00 -
LEEB leeb610 Magnetic Particle Flaw Detector Magnetization Pole Distance 0~220mm
$ 382.00 -
KAIRDA NDT650 Ultrasonic Flaw Detector high gain 130dB intelligent calibrating
$ 1470.00 -
LEEB leeb530 Digital Ultrasonic Flaw Detector Zero interface incidence 0~1000mm
$ 3149.00 -
RUNJIE RJTS800S digital Ultrasonic Flaw Detector, Speed of sound 1000~9999m/s
$ 1580.00
Introduction
Kedian D-type yoke probe is equipped with a live joint, which can detect flaws on flat and curved workpieces.D-type yoke probeIt is an optional probe for KCT-IIIA AND KCT-IIC magnetic particle flaw Detectors.
Parameters
Probe pole distance: 25-250mm adjustable
Lifting force: >5kg(AC)
Probe working Voltage: AC36V
Probe Operating Current: about 8-12A
KODIN D type yoke probe Flaw DetectorSpecifications
| LIST | VALUE |
|---|---|
| Scanning range | 25~250mm |
| lifting force | Greater than 5kg (AC) (replacement joints) |
| Operating Voltage of probe | AC36V |
| Operating current of probe | About 8-12A |
KODIN D type yoke probe Flaw Detector Packing list
Probe x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.