KCT-IIIA, KCT-IIIC Magnetic Particle Flaw Detector
Kedian O-type probe, also known as magnetic ring, can meet all the circumferential crazing flaw detection that can be put into the workpiece, use it to detect the fatigue marks of the workpiece, and can also demagnetize the workpiece away from the method. It is an optional probe for KCT-IIIA and KCT-IIIC Magnetic Particle Flaw Detector.
KODIN
-
LEEB leeb522 Ultrasonic Flaw Detector, digital Flaw Detector
$ 3172.00 -
MITECH MUT520B Ultrasonic Flaw Detector, all-digital portable Detector 6m range
$ 1606.00 -
LEEB leeb610 Magnetic Particle Flaw Detector Magnetization Pole Distance 0~220mm
$ 384.00 -
LEEB leeb510 Ultrasonic Flaw Detector, suitable for small diameter, thin-walled tube flaw detection
$ 1763.00 -
KAIRDA NDT681 digital Ultrasonic Flaw Detector PDF report 640 * 480 resolution
$ 1081.00
Introduction
Kedian O-type probe, also known as magnetic ring, can meet all the circumferential crack detection that can be put into the workpiece, and it is very convenient to detect the fatigue marks of the workpiece (fatigue cracks are perpendicular to the axial direction), and it can also be used to demagnetize the workpiece away from the method.O-probebeKCT-IIIA, KCT-IIC magnetic particle flaw DetectorOptional probes.
Parameters
Probe pole distance: 150mm
Lifting force: 1800TA
Probe working Voltage: AC36V
Probe Operating Current: about 8-12A
KODIN O-probe Flaw DetectorSpecifications
| LIST | VALUE |
|---|---|
| Scanning range | 150mm |
| lifting force | 1800TA |
| Operating Voltage of probe | AC36V |
| Operating current of probe | About 8-12A |
KODIN O-probe Flaw Detector Packing list
Probe x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.