PUSHEN CJQ-II Film Impact Device

CJQ-II Paint Film Impactor

It is mainly used to test the damage degree of paint film after impact, and has the advantages of simple structure and convenient operation.

A fixed-weight weight weight is applied to the test plate of the sample to be measured at a certain height, and the impact force is expressed in kg.cm.

The impactor consists of a sturdy base with a conduit holder attached to a catheter body with a slit and a shaft coil suitable for heavy loads in between

Guide the cylindrical weight to fall, with a marked height next to it to indicate the reading corresponding to the weight falling.

The impact height of the Type 2702 is 0-50 cm, and the impact height of the Type 2703 impactor is 0-100 cm.

The base of the instrument contains a die base support, and the punch should be sized to fit the die base.

This is important to prevent shear forces on the internal edges of the die holder.

Meets standards

GB/T 1732-1993 Determination of impact resistance of paint film

Technical parameters

Shipping list

Base and conduit with collar and scale

Punch and additional hammer (installed)

Paint Film Impact X1, Instruction Manual X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.