mitech MUT520B and Ipre UF200 compare

Hide the sameHighlight differences

Model selection comparator If you have any questions, please click below Service	mitech MUT520B Ultrasonic Flaw Detector 9800.0 RMB China Detail	Ipre UF200 Ultrasonic Flaw Detector 11300.0 RMB China Detail

Model comparison

Principle		UT Ultrasound	UT Ultrasound

Parameter comparison

Scanning range	0~6000mm
Frequency range	0.5~10MHz
Speed of sound	1000~15000m/s
Dynamic range	≥36dB	>40dB
Vertical Linearity	≤3%
Horizontal Linearity	≤0.2%
Display	320*240
Resolution	＞40dB(5P14)	>60dB
Blind spot	5MM
Sensitivity margin	> 60dB (200mm depth with 2 flat bottom holes)	>56dB
digital suppression	(0~80) %, does not affect linearity and gain
video duration	without
electrical noise level	≤10%
Probe type	Straight probe, oblique probe, dual crystal probe, penetration probe
gate	Inlet gate, loss gate; single gate reading, double gate reading
Alarm function	Beep alarm, LED light alarm
flaw detection standard	Built-in common flaw detection standards in various industries, directly calling, convenient and fast
Weld diagram	The weld shape parameters can be set, and the weld pattern and the position of defects in the weld can be visually displayed during flaw detection
Automatic calibration	Probe zero and probe angle (K value) Automatic calibration function; Speed of sound automatic measurement function
Memory	Real-time retrieval of the highest defect wave and recording of the peak defect echo
positioning	Real-time display of defect horizontal, depth (vertical), sound path position
defect quantification	Real-time display of defect equivalent dB value
defect characterization	Through the echo envelope waveform, it is convenient for manual experience to judge
surface correction	For flaw detection of curved workpieces, the circumferential position of defects can be displayed in real time
DAC/AVG	Linear dispersion is automatically generated, with unlimited sampling points, and can be compensated and corrected. Linear dispersion automatically floats with gain, automatically expands with sound path, and automatically moves with delay. AVG Linear dispersion can display any aperture
AWS D1.1	American Welding Society standard, provides a dynamic reflection "defect rating" for various AWS weld inspection applications. Avoids manual calculations and improves inspection efficiency (optional)
Crazing bathymetry	Automatic measurement and calculation of crazing depth using diffraction waves
Door widening	Amplify echo details for easy echo analysis
continuous recording	Record waveforms in real time, store and playback waveforms
waveform freezing	Freeze the waveform displayed on the screen for easy defect analysis
echo coding	Display 1 to 6 echo display areas in different Colors, better distinguish between primary and secondary waves, and facilitate the determination of defect locations
B-scan	(Ordinary B-scan) Real-time scanning and cross-sectional display make detection results more intuitive
Environmental temperature	(-10~50)℃
Relative Humidity	(20~95)%RH
Power Supply	Direct current (DC) 9V; lithium battery works continuously for more than 10 hours
Power saving method	Low power design
Working time	More than 10 hours
Protection level	IP64
Communication interface	USB2.0 high-speed communication transmission interface
PC software	Yes.
Operating language	Chinese
Dimensions	26317061mm
Machine Weight	5.2KG

Friendly reminder: This page is a comparison of mitech MUT520B,Ipre UF200.NBCLab only provides you with the similarities and differences of the product in the model and specifications.

For more information about mitech MUT520B,Ipre UF200similarities and differences, please refer to the NBCLab product details.

Focus on online sales of Lab Testing Instruments