zy

Can Film Applicators be 1.8 meters wide?

Sample substrate: biological raw materials, such as pig intestines, with uneven surfaces (several hundred microns); Coating thickness: 30~ 50μm; Material: Low viscosity, similar to water. Refrigeration should be -10 degrees; Biosubstrate modified films for medical apparatus Material has no resilience; Part of the coating is to penetrate; The first step is to apply The second part is frozen The third part is lyophilized

Corrosion material Moulding, doctor blade material can be made of 316 stainless steel?

Apply slurry on the Aluminum Panel, the thickness is 1mm, and the heating function is required. Which Film Applicator to use?

Coated with water-based glue ptfe + ceramic powder, the viscosity is very low, Solid content 72% Wet film thickness 22~ 200μm, Dry-Film 12.5~ 127, μm; Automatic feeding + metering rod & doctor blade Effective area: 400 * 400mm Aluminum foil substrate without heating

Which material of substrate have you tested and what is the thickness to ensure flat adsorption?

gluing Film thickness: 50μm Substrate: Glass Application width: 410m

Can Experimental Film Applicators Scratch Film About 1μm?

Substrate: pet substrate Film thickness: 130~ 150μm

I want to do coating uniformity testing in the lab and need an Automatic Film Applicator.

Make film, Thickness 20μm PET substrate For heating Solid 5% A little toxic, 2-iodoxylene

You need to apply a film thickness within 2um, with a micro-tack coating liquid, Coated on the surface of the thin steel plate, Automatic feeding, no heating required

Can the automatic feeding speed of Film Applicator be set?

Use your Glue spreader on the film and apply our glue to see if it can be evenly applied?

We mainly do solvent/non-solvent coating molds and semi-curing sheets Substrate: Plastic film, PET, release film, PVC, copper foil aluminum foil; Film thickness: a few microns to one or two hundred microns

Hot-melt adhesive Film Applicator Melting point 150~ 160 degrees, Film thickness

Can this Film Applicator be prepative conductive ink?

Do you have UV Spreader equipment at home? You can apply acrylate, roll in the middle, and glue the upper and lower films at the same time, and the thickness should be the same.

Making polymer materials Film thickness tens of microns Substrate: pev, thin film For heating

Coating, onto the metal Thickness: Uncertain, 100μm~ 1mm Coated on aluminum foil