zy

Can this testing machine be used for composite inspection?

What is the minimum measurement area of this HCC-18A Magnetic Thickness Gauge?

Perovskite solar cell research requires uniform thin films with Spreader. What are the recommendations?

Coated battery paste, film thickness, 10μm, substrate copper foil aluminum foil

Is there a recommended film applicator for scraping pu leather hand boards in the laboratory? Our wet film thickness is 100 microns, we tried it with a wire rod, the flow is uneven, the viscosity is tens of thousands, and the width needs to be about 400

What is the allowable viscosity of the Spreader material for this coater?

Plastic belt PVC, 1mm thick, 22, 25, 28, the widest is 3 cm, apply a kind of granular glue on the plastic belt, the granular glue is heated and melted evenly on the back The tape is resistant to high temperature, 180-210 degrees. The melting point of the glue starts around 140 The cloth is flat, and the edge banding tape varies from house to house, but basically there is a small C type. The operating temperature is 190 and up to 10 ° C The flexibility and flat spread of the cloth is far better than the PVC edge banding strip, the edge strip has been formed, to consider the batch Spreader

What is the principle of Automatic Film Applicator heating?

Does any of Zhongyi Lab Film Applicators meet the standard of GB/T9756?

What is the principle of Automatic Film Applicator heating?

Is this Lab Film Applicator GB/T9756 compliant?

What is the principle of Automatic Film Applicator heating?

Does this Wire Bar Vacuum adsorption Lab Film Applicator comply with GB/T9756 standard?

Viscous polyurethane is scraped on PET, can this machine be used?

The laboratory makes polyvinyl alcohol interlayer film, can use this machine film?

Meet GB/T9756 Wire Rod Lab Film Applicator

Do you have the vacuum adsorption doctor blade Lab Film Applicator involved in GB/T9756?

Do photosensitive Coating experimental film, can the wire rod configured by this coater be scratched?