STIP-scan

Detect the nitrite content, the range is 0.002mg/L-1mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the GB7493-87 standard.

LED Light source, bandpass filter wavelength 525 & 610 nm; Bandwidth 8nm; Wavelength Accuracy +/- 1.0 nm, can be used for the measurement of pH acid alkalinity, calcium ions, nitrate, phosphoric acid and other parameters, is a powerful and widely used water quality analysis instrument.

Reagent name Nickel, range 0.00 to 7.00 g/L (as Ni), 100 times.

Detect the content of phosphoric acid salt, the range is 0.02mg/L-20mg/L (segmented determination), without digestion, using digestion Colorimetric integrated detection, in line with HJ 670-2013 standard.

Measurement range 0 to 200 mg/L (as SiO2), resolution 1 mg/L, accuracy @25 ℃: +/- 1 mg/L +/- 5% of reading, widely used in water treatment, drinking water monitoring, environment protection and industrial process control.

-2.000~20.000pH, accuracy +/- 0.002pH, Intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.

Detect the content of chlorine dioxide, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the digestion Colorimetric integrated detection is used.

Range 0-200mg/L, built-in bubble elimination system, with water storage function, invisible near monochrome Infrared source, two-point correction, imported core accessories, can be customized range.

Detection of manganese content, the range is 0.04mg/L-5mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11906-89 standard.

Detect the content of volatile phenols, the range is 0.1mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the HJ503-2009 standard.

Using DPD Colorimetry, it can accurately measure residual chlorine, total chlorine and chlorine dioxide in water, support single and multi-point calibrating, Data storage, USB communication and waterproof and dustproof functions, suitable for drinking water, medical wastewater, swimming pool water and other water quality Determination of residual chlorine, total chlorine and chlorine dioxide.

Residual chlorine measurement range: 0.00 to 5.00mg/L (asCl2), resolution: 0.01mg/L, accuracy: +/- 0.03mg/L +/- 3% of reading, total chlorine measurement range 0.00 to 5.00mg/L (asCl2), built-in reaction Timer to ensure consistent results between sample measurements and users.

Measurement range 0.0 to 20.0 mg/L (e.g. Cl -), resolution 0.1 mg/L, accuracy @25 ℃： +/- +/- 6% of reading at 25 ℃, widely used in water treatment, environment monitoring, industrial production and other fields.

Measurement range of iron 0.00 to 1.60 mg/L (as Mn), resolution 0.01 mg/L, Mn Measurement range 0 to 300 μg/L (as Mn), resolution 1 μg/L, commonly used in environment monitoring, wastewater treatment, drinking water mass detection and other fields.

Detection of nickel content, the range is 0.1mg/L-4mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11910-89 standard.

Measurement range 0.00-20 mg/L, resolution 0.01mg/L, accuracy @25 ℃: +/- 3 %； +/- 0.5mg/L of reading, commonly used in drinking water monitoring, industrial production process control and other fields to ensure that the concentration of fluoride ions in water is within the safe range.

Detection of nitrate nitrogen content, the range is 0.5mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Water Quality, Chromotropic Acid Spectrophotometry".

Measurement range 0 to 300% oxygen saturation, Operating temperature range 0 to 50 ℃, integrated temperature sensor and easily replaceable PTFE membrane cover, the ability to transfer information allows hot swapping of the probe without recalibrating.

Measurement range 0.0 to 20.0 mg/L; 10 to 100 mg/L (as K), resolution 0.1 mg/L, accuracy @25 ℃: +/- 3 mg/L +/- 7% of reading, commonly used in soil and agricultural analysis to assess soil fertility and crop nutritional status, it can also be used to monitor oxidation potassium content in wastewater, etc.

Residual chlorine Measurement range 0.00 to 5.00 mg/L (as Cl2), resolution 0.01 mg/L, total chlorine Measurement range 0to 500 mg/L (as Cl2), resolution 1 mg/L, using innovative Optical inspection system design, with good accuracy.

Measurement range 0.000 to 1.500 mg/L (as Cu2 +), resolution 0.001 mg/L, accuracy @25 ℃: +/- 0.010 mg/L +/- 5% of reading, commonly used in environment monitoring, wastewater treatment, drinking water mass detection and other fields.

Measurement range 0 to 300 μg/L (as Mn), resolution 1 μg/L, accuracy @25 ℃: +/- 10 μg/L +/- 3% of reading, commonly used in environment monitoring, drinking water mass detection, industrial process control and other fields.

Measurement range 0 to 300 μg/L (as Cr (VI)), resolution 1 μg/L, accuracy @25 ℃: +/- 10 μg/L +/- 4% of reading, commonly used in industrial wastewater treatment, environment monitoring and water quality control.

Measurement range of iron 0.00 to 1.60 mg/L (as Mn), resolution 0.01 mg/L, accuracy @25 ℃: +/- 0.01 mg/L +/- 8% of reading, commonly used in environment monitoring, water quality control, industrial process control and other fields to ensure that the iron concentration in water is within the safe range and meets the requirements of relevant standards and regulations.