STIP-scan

Range -pH- 2.00-16 pH (pH- mV conversion: 1000.0 mV), resolution -pH0.01 pH (0.1 mV), accuracy @25 ℃ -pH0.01 pH (0.2 MV), automatic temperature compensation, unique combination of electrochemistry and Colorimetry, not only suitable for laboratory, but also for rapid water quality measurement in the field or in the field.

Detect COD, Total phosphorus, Total nitrogen, turbidity, suspended solids (SS) content in water, built-in thermal printer, expandable Miscellaneous detection parameters, standard digestion instrument.

Detect the Total phosphorus content in water quality, the range is 0.02mg/L-20mg/L (measured in sections), the digestion is carried out in a Water Bath at 125 ℃ for 30min, and the digestion Colorimetric integrated detection is used, which conforms to the GB11893 standard.

Detect ammonia nitrogen, Total phosphorus, turbidity, suspended solids (SS) four parameters, Miscellaneous water quality detection parameters can be expanded, built-in thermal printer, can store 30,000 measurement data.

The content of ammonia nitrogen and Total nitrogen in water was detected, and the digestion Colorimetric integrated tube Colorimetric was used to directly display the results. The HJ535-2009 Knoll reagent Spectrophotometric method, spec-trophotometry and HJ535-2009 Knoll reagent Spectrophotometric method, spec-trophotometry were used.

Simultaneously detect the content of COD, ammonia nitrogen, Total phosphorus, turbidity, and suspended solids, in line with HJ535-2009, GB11893-89, HJ/T399-2007 standards, using Spectrophotometric method, spectra-trophotometry and direct Colorimetry, built-in thermal printer.

Detect COD, ammonia nitrogen content, in line with HJ535-2009, HJ/T399-2007 standards, built-in thermal printer, using digestion Colorimetric integrated tube Colorimetric.

At the same time, the content of COD, Total phosphorus, turbidity and suspended solids (SS) in the water was detected, which met the standards. The built-in thermal printer was used, and the digestion Colorimetric integrated tube Colorimetric was used.

Acidity pH range 2.00-16 pH, resolution pH0.01pH (0.1mV), accuracy 0.01pH (0.2MV), automatic temperature compensation, built-in standard calibrate points, nearly 75 water quality measurement items, suitable for laboratory, field or field rapid water quality measurement.

Detect Total nitrogen content, range 0.5-100mg/L, use persulfate oxidation method, built-in thermal printer, use digestion Colorimetric integrated tube, standard detection program Total nitrogen L and Total nitrogen H.

Measurement range -pH-2.0 to 20.0 pH; -2.00 to 20.00; -2.000 to 20.000 pH, 7-inch capacitive touchscreen, equipped with an electrode holder with a flexible arm, the holder can be quickly installed.

20 meters long, 7 items of important water quality indicators rapid simultaneous measurement, multiparameter integrated electrode design, with IP67 waterproof and anti-skid body and IP68 waterproof electrode, suitable for pipeline or deep well measurement.

Simultaneously detect COD, ammonia nitrogen parameters, digestion Colorimetric integrated detection, with Pipette and digestion instrument, imported cold Light source, can choose standard measurement or Continuous Measurement mode.

The HI98195/40 multiparameter Water Quality Analyzer is equipped with a 40-meter electrode for extremely deep water monitoring. With IP67 waterproof performance, it can comprehensively measure pH, conductivity, TDS and other 10 water quality indicators. Support 45,000 Data storage, USB interface and GLP function, suitable for long-term and large-scale water quality monitoring in the most severe environments.

Digestion Colorimetric integrated tube detection, detection of COD concentration value, range 5mg/L-10000mg/L (segmented), Sensitivity up to 0.001mg/L, with digestion instrument and pipette gun.

The HI98195/20 multiparameter Water Quality Analyzer is equipped with a 20-meter electrode, suitable for deep water and long-distance monitoring. With IP67 waterproof design, it can accurately measure 10 water quality parameters such as pH, conductivity, TDS, etc. Support 45,000 Data storage, USB data transmission and GLP management to meet the needs of multi-scene applications, suitable for long-term monitoring.

40 meters of wire, IP67 waterproof and anti-skid body and IP68 waterproof electrode, support up to seven water quality indicators of rapid simultaneous measurement, can install pH (ORP), EC electrode

The HI98195/10 multiparameter Water Quality Analyzer is equipped with a 10-meter electrode, suitable for deep water quality monitoring. With IP67 waterproof performance, it can quickly measure 10 water quality indicators such as pH, ORP, conductivity, etc. Support 45,000 Data storage, USB interface and GLP function, suitable for long-term data collection and analysis in complex wild environments.

Multiparameter water quality measurement, designed for field measurements in harsh environments. The instrument supports simultaneous measurement of pH, ORP, dissolved oxygen, atmospheric pressure and temperature five key water quality indicators, with IP67 waterproof and anti-skid body and IP68 waterproof electrode, ensuring Reliability in complex environments such as pipelines or deep wells.