STIP-scan

pH/mV/temperature, calibrate intelligent authentication and calibrate reminder function, GLP calibrate record review function, can use the HI92000 data cable to transfer data directly to the PC, can convert the recorded data into real-time Linear dispersion map.

At the same time, the parameters of four heavy metals, total chromium, hexavalent chromium, copper and zinc, were detected by digestion Colorimetric integrated tube, and imported cold Light source, Sensitivity was as high as 0.001mg/L.

-2~ 16/0.01 pH, -1999.9~ + 1999.9/1 mV, salinity: 0~80PPT, conductivity: 0~200.0mS/0.01 µS, TDS: 0~200PPT, temperature -10.0~120.0 ℃, 750 sets of storage, ergonomic design, operation-friendly APP, Bluetooth connection

High-performance wireless Bluetooth Water Hardness Meter, suitable for Android smartphones or tablets, 5-point button calibrated, 12 function parameters can be customized in the settings menu, Measurement accuracy: 1% F.S.

Two-channel measurement data, based on Android Operating system, including 8 measurement functions, the instrument is suitable for outdoor, aquaculture measurement of sample pH, oxidation reduction potential (ORP), Ion concentration, conductivity, total dissolved solids (TDS), salinity, resistivity.

● Dissolve oxygen concentration range: 0.0~20.0mg/L, accuracy : +/- 0.5mg/L ●% saturation range: 0~200%, accuracy : +/- 2.0% ● 1 or 2 point calibrate, automatic temperature compensation, optional salinity and atmospheric pressure coefficient, ● Automatic terminal lock, automatic shutdown, 100 sets of data storage, USB Communication interface

Bagged pH standard buffer with pH values of 4.01, 7.00 and 10.01 for 250 ml standard solution

High-performance wireless Bluetooth ORP meter, suitable for Android smartphones or tablets, 1 point offset calibrated, 10 function parameters can be customized in the settings menu, Measurement accuracy: 0.2mV.

Measurement range: PH 2.00 - 16.00pH, ORP 699.9mV, +/-1999mV, built-in three calibrated points, automatic recognition of one or two points calibrated, easy to operate and economical.

Simultaneously detect the content of COD, ammonia nitrogen, Total phosphorus, turbidity, and suspended solids, in line with HJ535-2009, GB11893-89, HJ/T399-2007 standards, using Spectrophotometric method, spectra-trophotometry and direct Colorimetry, built-in thermal printer.

Detect the concentration value of suspended solids, the range is 5mg/L-500mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the imported cold Light source conforms to the "National Standard Weight Method" standard.

Detection of residual chlorine total chlorine content, the range is 0.1-10mg/L (measured in sections), no digestion is required, the detection time is 1 to 10 minutes, and the digestion Colorimetric integrated detection is used, which meets the standard of "TMB photometric method".

Detect the total chromium content, the range is 0.01mg/L-5mg/L (measured in sections), the digestion is 30min in a Water Bath at 125 ℃, and the detection time is 45-55 minutes. The digestion Colorimetric integrated detection is used, which conforms to the GB7466-87 standard.

Detect the content of copper ions, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Bicyclohexanone Oxalyl Dihydrazone Method".

Simultaneously detect COD, ammonia nitrogen, total phosphorus, turbidity parameters, standard digestion instrument and pipette gun, digestion Colorimetric integrated tube detection, Sensitivity up to 0.001mg/L, with power-off protection function.

Dissolved oxygen measurement range 0.0 to 50.0mg/L (ppm), automatic temperature compensation (ATC), height, salinity automatic compensation, waterproof design, custom design, unique dissolved oxygen probe, suitable for aquaculture industry.

Detect the fluoride content, the range is 0.02mg/L-10mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the HJ488-2009 standard.

Detect the content of silica, the range is 0.1mg/L-5mg/L (segmented measurement), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Silicon Molybdenum Blue Colorimetry" standard.

Equipped with polarographic electrodes, based on the Android Operating system, the setting menu can customize 15 functional parameters, the instrument is suitable for measurement of dissolved oxygen, BOD, OUR and SOUR, Measurement accuracy: 0.2mg/L.